Yamaha DXR15mkII 15-Inch 1100W 2-Way Bi-Amplified Powered Loudspeaker with FIR-X Tuning

Yamaha DXR15mkII: The 1100W Powered Speaker That Doubles as a Stage Monitor

The Yamaha DXR15mkII is a 15-inch, two-way, bi-amplified powered loudspeaker built for the working sound provider who needs one box to cover the most demanding job in the rig. A 1100W Class-D amplifier splits 950W to the 15-inch woofer and 150W to the high-frequency compression driver, pushing a clean 134 dB peak SPL with the kind of headroom that lets vocals and kick drum sit without the amp ever sounding stressed. Whether you are filling a club, a sanctuary, or a corporate ballroom, this is the cabinet that shows up and does the work.

1100W of Bi-Amplified Class-D Power With 134 dB of Usable Headroom

Bi-amplification means the DXR15mkII drives its woofer and compression driver from two dedicated amplifier sections instead of one amp split by a passive network. The result is tighter low end, cleaner highs, and dramatically lower distortion at high output. Reviewers who have run these for years describe an insane amount of clean volume with virtually no distortion — the 1100W dynamic rating (950W LF plus 150W HF) and 134 dB peak SPL are numbers that hold up in the room, not just on the spec sheet. For DJs and bands who have blown the doors off cheaper speakers, that headroom is the whole point.

FIR-X Tuning and a Neodymium Compression Driver for Vocals That Cut Cleanly

The 1.75-inch neodymium HF compression driver mounts to a 1-inch throat and reproduces the upper midrange and treble with a clarity that makes voices and guitars cut through a dense mix without turning harsh. Yamaha's FIR-X tuning — a linear-phase FIR crossover — time-aligns the 15-inch woofer with the horn so the two drivers arrive in phase, eliminating the smeared midrange that plagues lesser powered speakers. The audible payoff is a controlled, non-fatiguing top end and a coherent sound field whether you are 3 feet away or 50.

D-CONTOUR Lets One Speaker Be a Main or a Floor Monitor

The built-in D-CONTOUR multiband processor offers selectable FOH/MAIN and MONITOR voicings plus an OFF setting. In FOH/MAIN it optimizes tonal balance for front-of-house throw; flip it to MONITOR and the same cabinet retunes for floor-wedge duty, with the 7-degree pole-socket tilt and mirror-mode cabinet geometry letting you lay it on its side as a stage monitor. Buyers consistently note that monitor mode delivers clear foldback with no obvious phase problems — one speaker, two jobs, no extra purchase.

A Built-In 3-Channel Mixer and Flexible I/O for Gigs Without a Console

Each DXR15mkII carries its own 3-channel mixer: a combo-friendly XLR mic/line input, a 1/4-inch TRS input, and a stereo RCA input. A solo performer can plug a microphone and a backing-track source straight into the speaker and skip the external mixer entirely. An XLR THRU (wired parallel to Input 1) and a dedicated LINK OUT let you daisy-chain a second cabinet or feed a subwoofer, while the 35mm dual-angle pole socket and M10 fly points cover pole-mount, tripod, and suspended-install scenarios.

Built to Travel: Rugged ABS Cabinet at 48 lb

The enclosure is molded ABS with a matte-black finish and cast handles, and owners report it shrugs off the bumps and scrapes of regular load-ins with a grille that holds its shape. At 48.1 lb it is not a featherweight, but the balanced footprint and solid handles make it a manageable one-person carry for a 15-inch box that hits this hard. For the upgrader stepping out of foam-cone PA speakers and the comparison shopper weighing pricier brands, the DXR15mkII is the cabinet that earns its place in the truck for years.