Yamaha DBR10 10-Inch 700W 2-Way Powered Loudspeaker with D-CONTOUR DSP

Home On Sale Now / Clearance Surface Mount Speakers Yamaha DBR10 10-Inch 700W 2-Way Powered Loudspeaker with D-CONTOUR DSP
was $539.00 Special Price $409.99

10-Inch 2-Way Bi-Amp Powered Loudspeaker, 700W Class-D Dynamic Power, 129 dB Max SPL, 55 Hz–20 kHz Range, FIR-X Tuning Crossover, D-CONTOUR FOH and Monitor DSP, 2-Channel Onboard Mixer, Dual Combo XLR/TRS + RCA Inputs, 50-Degree Floor-Monitor Bevel, 35mm Pole Socket, 23.2 lb Cabinet, Top Carry Handle

Availability: In Stock
SKU
DBR10
This product includes a 1 year Yamaha manufacturer's warranty. Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials.

Yamaha DBR10 Features:

  • 700W CLASS-D POWER: Bi-amp engine drives clean, headroom-rich output Yamaha conservatively rates — 700 watts that behave like 700 watts
  • 129 dB MAX SPL: Fills small-to-mid rooms from a 10-inch enclosure without strain or distortion
  • D-CONTOUR DSP: One switch retunes the speaker between FOH/MAIN throw and MONITOR wedge response
  • FIR-X TUNING CROSSOVER: Linear-phase FIR filter at 2.1 kHz integrates woofer and compression driver with flat phase
  • 2-CHANNEL ONBOARD MIXER: Dual combo XLR/TRS inputs plus RCA — run a mic and a music source with no external mixer
  • 50-DEGREE MONITOR BEVEL: Tip it on its side and the cabinet doubles as a stage floor wedge
  • XLR THRU/MIX OUTPUT: Daisy-chain a second cabinet or feed a subwoofer from the rear XLR
  • 23.2 LB PORTABILITY: Lightest model in the DBR line with a top carry handle for one-hand load-in
  • 35mm POLE SOCKET + M8 RIGGING: Stand-mount on a tripod or fly with optional eyebolts

Yamaha DBR10: The 23-Pound Powered Speaker That Fills the Room and Doubles as a Monitor

The Yamaha DBR10 is a 10-inch, 2-way powered loudspeaker built for the performer, presenter, or sound provider who needs real output without a real back strain. It packs a 700-watt Class-D bi-amp engine and a 129 dB max SPL into a plastic cabinet that weighs just 23.2 pounds — the lightest model in Yamaha's DBR line. Whether you are running front-of-house for a coffeehouse gig, throwing a vocal monitor at your feet on stage, or putting a portable PA in the back of a hatchback for a mobile event, the DBR10 is engineered to do the job and then disappear into a bag without a second person to lift it.

700 Conservatively-Rated Watts: Why Yamaha's Power Numbers Mean More

The DBR10's Class-D amplifier delivers a dynamic 700 watts — 500 to the woofer, 200 to the high-frequency driver — and continuous power of 325 watts. Yamaha is known for under-rating its amplifiers, and the DBR10 lives up to it: at full output the speaker stays clean with headroom to spare, where lesser powered speakers in this class start to compress and harden. Players who use the DBR10 as a monitor describe clean vocals with genuine warmth, well-defined mids and highs, and no harshness in the top end. The FIR-X tuning crossover, a linear-phase FIR filter set at 2.1 kHz, is the reason the two drivers integrate seamlessly — it corrects phase across the crossover region so the speaker sounds coherent on-axis and off.

D-CONTOUR: One Speaker, Two Voicings for Mains or Monitor

The single most useful feature on the DBR10 is D-CONTOUR, Yamaha's onboard intelligent DSP. Flip it to FOH/MAIN and the speaker is voiced for front-of-house throw — tuned to project to a room and stay articulate at distance. Flip it to MONITOR and the same speaker is re-voiced for floor-wedge use, with the response shaped for a performer standing a few feet away looking down at it. Combined with the 50-degree bevel on the cabinet, the DBR10 literally becomes a monitor when you lay it on its side — no second product, no separate wedge to buy and haul. For the solo musician, the worship volunteer, or the mobile operator, that flexibility is the whole value: one box covers mains duty Saturday and monitor duty Sunday.

A Mixer Built Into the Speaker: Plug a Mic and Music Straight In

The DBR10 has a 2-channel onboard mixer on the rear panel. INPUT1 is a combo XLR/TRS jack that takes a microphone or line-level signal; INPUT2 is a second combo jack plus a pair of RCA inputs for a phone, laptop, or media player. That means a presenter can plug a wireless mic into channel one and background music into channel two and run an entire event off a single speaker — no mixing console required. When you do need to scale up, the rear XLR output daisy-chains a second DBR cabinet for stereo, or feeds a powered subwoofer to extend the low end the 10-inch woofer intentionally leaves to a dedicated sub.

Built to Travel: 23.2 Pounds, One Handle, Pole or Fly Mount

Portability is the DBR10's defining trait — owners consistently call out how easy it is to move, often half the size and weight of the keyboard amps or older PA boxes they replaced. The top carry handle balances the 23.2-pound cabinet for one-hand pickup. A 35mm pole socket on the bottom drops it onto any standard speaker stand or subwoofer pole, and two M8 rigging points accept eyebolts for permanent installs. A 4-speed cooling fan keeps the Class-D amp stable through long sets, and the universal 100–240V supply means it works anywhere. This is the speaker you buy when you are tired of needing two people and a dolly to set up a small show.

Who the Yamaha DBR10 Is For

For the solo performer or duo playing small rooms, the DBR10 is a complete front-of-house solution that fits in the car. For the band that needs reliable, feedback-resistant floor monitors, the D-CONTOUR MONITOR mode and 50-degree bevel make it a wedge that sounds warm and stays clean. For the mobile DJ, presenter, or AV company, it is a portable PA speaker that mixes a mic and music on board and rigs or pole-mounts in seconds. The one honest caveat: the 10-inch woofer is voiced for clarity, not deep bass — pair it with a subwoofer when the program demands low end. For everyone who values clean Yamaha-grade sound in the lightest possible package, the DBR10 is the powered speaker that earns its place in the gig bag.

More Information
MPN DBR10
Color Black
On Promo No
UPC / EAN 86792992440
Brand Yamaha
Product Condition New
Availability In Stock

Yamaha DBR10 Specifications

Speaker Type2-Way, Bi-Amp Powered, Bass-Reflex
LF Driver10″ Cone, 2″ Voice Coil
HF Driver1″ Throat Compression Driver
Crossover2.1 kHz FIR-X Tuning (Linear Phase FIR)
Output Power700 W Dynamic (Class-D)
Maximum SPL129 dB SPL (1m, On Axis)
Frequency Range55 Hz – 20 kHz (-10 dB)
Coverage90° H × 60° V
Inputs2× Combo XLR/TRS, 2× RCA
OutputXLR (CH1 Thru or CH1+CH2 Mix)
DSPD-CONTOUR (FOH/MAIN, MONITOR, OFF)
Pole Socket35 mm
Monitor Angle50°
Dimensions12.1″ W × 19.4″ H × 11.4″ D
Net Weight23.2 lb (10.5 kg)
In the BoxDBR10 Loudspeaker, AC Power Cord, Owner's Manual