sE Electronics X1 S Vocal Pack with Shockmount, Pop Filter, and Cable

sE Electronics X1 S Vocal Pack: The Studio Condenser Essentials in One Box

The sE Electronics X1 S Vocal Pack is a streamlined recording bundle pairing the low-noise X1 S cardioid condenser microphone with the core accessories needed to track vocals. It includes the microphone, a dedicated shockmount, an sE metal pop shield, and a 10-foot mic cable, delivering the essentials without a Reflexion Filter. This makes it the ideal choice for anyone who already has a treated room or a stand-mounted setup and simply needs a great mic and the fundamentals to record. Every piece is chosen to work together, so there is no guesswork in assembling a functional vocal chain. For the recordist who wants professional condenser sound at the heart of a clean, uncomplicated kit, the Vocal Pack delivers exactly that.

sE Electronics X1 S Vocal Pack: The Versatile X1 S Condenser at the Center

At the core of the Vocal Pack is the X1 S cardioid condenser, a studio microphone rated at 9 dBA self-noise and a 160 dB maximum SPL for clean capture from the softest to the loudest sources. Its condenser capsule senses minute movements of a charged diaphragm, giving recordings the detail and top-end air that vocals and acoustic instruments need. Switchable 80 Hz and 160 Hz low-cut filters and switchable -10 dB and -20 dB pads let you shape its response to the singer and the space. That range means one microphone comfortably covers an intimate voiceover and a full-voiced vocal performance alike. It is a true studio condenser anchoring the pack with professional-grade sound.

sE Electronics X1 S Vocal Pack: A Dedicated Shockmount for Vibration-Free Takes

The Vocal Pack includes a shockmount purpose-built to hold the X1 S securely while isolating it from mechanical vibration. A shockmount suspends the microphone on elastic bands so that low-frequency energy traveling up the stand, such as footsteps, desk bumps, and floor rumble, is absorbed before it reaches the capsule. Without this isolation, those vibrations are recorded as a dull, thumping rumble that is difficult to remove without also thinning the voice. Cradled in its shockmount, the X1 S captures a steady, clean signal even when the recording environment is less than perfectly still. It is a foundational piece of any serious vocal chain, included here so you are ready to record properly from the start.

sE Electronics X1 S Vocal Pack: An sE Metal Pop Shield for Plosive Control

The pack includes the sE metal-mesh pop shield, which sits between the vocalist and the microphone to control the plosive bursts that accompany hard consonants. Sounds like P and B release a sudden gust of air that slams the diaphragm and produces an ugly low-frequency pop, one of the most common flaws in home vocal recordings. The pop shield's metal mesh disperses that gust before it reaches the capsule while letting the voice pass through cleanly. Unlike fabric filters, a metal design resists moisture from close singing, wipes clean, and preserves the high-frequency detail that keeps a vocal crisp. The result is smooth, professional vocal takes free of distracting pops, even with an energetic performance.

sE Electronics X1 S Vocal Pack: A 10-Foot Cable and a Focused, Streamlined Kit

The Vocal Pack includes a 10-foot mic cable, completing a compact recording chain that needs only an interface or mixer with 48V phantom power to run. A balanced XLR cable carries the microphone's signal while rejecting the hum and interference that unbalanced connections invite, keeping the recording clean over the run to your interface. By leaving out the Reflexion Filter found in the Studio Bundle, the Vocal Pack stays focused on the core essentials for anyone whose room does not require added acoustic treatment. That streamlined approach keeps the kit compact and the setup fast, with no components you do not need. Everything in the box works together to get a clean vocal to your recorder.

sE Electronics X1 S Vocal Pack: Core Essentials for Treated Rooms and Ready Stands

The X1 S Vocal Pack is for vocalists, podcasters, and instrumentalists who want a professional condenser and the fundamental accessories without extras they will not use. First-time buyers with a reasonably controlled room get a complete, coherent starting point, including mic, shockmount, pop shield, and cable, ready to record immediately. More experienced users who already own acoustic treatment or a booth get exactly the essentials to put the X1 S to work. Shoppers comparing it to the Studio Bundle should choose the Vocal Pack when room reflections are already under control, since the main difference is the Studio Bundle's added Reflexion Filter. In the series' familiar black finish, it is a focused, no-waste path to great vocal recordings.