sE Electronics V CLAMP Drum Microphone Mount-1

sE Electronics V CLAMP Drum Microphone Mount

sE Electronics V7 MG V7 Replacement Mic Grill-1

sE Electronics V7 MG Standard Replacement Microphone Grille

sE Electronics V PACK CASE Plastic Flight Case for V-Series Drum Mics

Home Dynamic Microphones sE Electronics V PACK CASE Plastic Flight Case for V-Series Drum Mics
was $159.00 Special Price $129.00

Empty Plastic Flight Case for V-Series Drum Microphones, Roadworthy Tour-Tough Construction, Pre-Cut Foam for V7 X, V KICK, 3x V BEAT, 3x V CLAMP, 3x sE8 or sE7 Condensers with Clips, Protective Transport and Storage, Case Only, No Microphones Included

Availability: Special Order, Please Allow 2-4 Weeks For Delivery
SKU
V PACK CASE

 

This product includes a 1 year SE Electronics manufacturer's warranty that can be extended to 3 years upon registering the products. Coverage: Se Electronics will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials.

sE Electronics V PACK CASE Features:

  • ROADWORTHY PLASTIC FLIGHT CASE: Tour-tough construction built for the rigors of the road and repeated load-ins
  • PRE-CUT V-SERIES FOAM: Foam cutouts hold a V7 X, a V KICK, three V BEAT, three V CLAMP, and three sE8 or sE7 condensers with clips
  • CASE ONLY, NO MICS INCLUDED: An empty case for building or replacing a V-Series drum mic pack; microphones are not included
  • PROTECTIVE TRANSPORT AND STORAGE: Keeps a full V-Series drum mic complement organized and cushioned in transit
  • REPLACEMENT OR UPGRADE CASE: Ideal for V-Series owners assembling their own pack or replacing a worn case

sE Electronics V PACK CASE: A Roadworthy Flight Case Cut for a Full V-Series Drum Rig

The sE Electronics V PACK CASE is an empty, tour-tough plastic flight case built to transport and protect a complete V-Series drum microphone collection - the case only, with no microphones included. Its internal foam is pre-cut to hold a V7 X, a V KICK, three V BEAT mics, three V CLAMP rim mounts, and three small-diaphragm condensers with their clips, each in a dedicated berth. That makes it the natural home for a drummer assembling a V-Series pack piece by piece, or a replacement case for an owner whose original has worn out. Rugged enough for the road and organized enough for the studio shelf, it turns a loose pile of mics into a single grab-and-go unit. It is the quiet backbone that keeps a working mic collection safe and together.

Why Pre-Cut Foam Is What Actually Protects Your Mics

The greatest threat to a microphone collection is not use but transport - the shock, drops, and constant vibration of moving gear are what crack capsules and bend hardware over time. The V PACK CASE's fitted foam suspends each mic in a snug, shaped cavity so it cannot shift, rattle, or knock against its neighbors while the case is in motion. Because the cutouts match specific V-Series pieces, each mic is cradled to its exact shape rather than floating in generic padding that lets it move. For a beginner, that means expensive capsules survive the trip to and from a gig; for a touring professional, it means a mic locker that holds up across years of load-ins and trailers. Protection, not just storage, is the whole point of a fitted case.

Roadworthy Plastic Construction Built for the Rigors of Touring

The V PACK CASE is a rugged plastic flight case engineered to take the knocks of real-world transport - stacked in a trailer, loaded onto a stage, and hauled between venues. Its hard shell resists the impacts and crushing that a soft bag cannot, standing up to the physical abuse a working backline endures on tour. Unlike a generic tote, it is purpose-built around the V-Series complement so the exterior stays compact while the interior holds a full drum-mic set. A home studio owner gets a case sturdy enough to double as long-term shelf storage between sessions; a gigging engineer gets transport that shrugs off the daily grind of the road. Build quality here is what lets the same mics keep working for a decade.

Foam Cutouts Sized for the Full V-Series Complement

Inside, the foam is cut for a specific, complete drum-mic loadout: one V7 X snare mic, one V KICK, three V BEAT tom mics, three V CLAMP rim mounts, and three sE8 or sE7 small-diaphragm condensers with mic clips. That layout mirrors a full V PACK-style kit, so a drummer buying V-Series mics individually can house the entire rig in one organized case as the collection grows. Each dedicated slot means packdown is fast and a missing piece is obvious at a glance before you leave the venue. For the first-time buyer, the case provides a clear roadmap of exactly which mics complete a full kit; for the upgrader, it consolidates a scattered collection into a single tidy unit. Everything has a place, and everything stays in its place.

For the Rig-Builder, the Replacement Buyer, and the Touring Engineer

Because it is sold as a case only, the V PACK CASE serves three clear needs: the drummer building a V-Series drum-mic collection from individual mics who wants proper transport from the start, the owner who needs a replacement for a case that has finally worn out, and the working engineer who wants a spare fitted case for a second rig. In the studio it keeps a mic set organized, dust-free, and ready to grab; on the road it protects that same set through every load-in and load-out. Nothing about it changes the sound of your mics - its whole job is to make sure those mics arrive intact and stay together. For anyone with a V-Series drum-mic investment, it is the piece that safeguards everything else. Set it up once and your collection has a home for good.

More Information
MPN V-CASE-U
Color Black
Form Case
UPC / EAN 819032011744
Brand Se Electronics
Product Condition New
Availability Out of Stock

sE Electronics V PACK CASE Specifications

TypeEmpty flight/carry case (accessory)
ConstructionRoadworthy tour-tough plastic flight case
Foam Cutouts1x V7 X, 1x V KICK, 3x V BEAT, 3x V CLAMP, 3x sE8/sE7 condensers with clips
ContentsCase only, no microphones or accessories included