dbx 530 3-Band 500 Series Parametric EQ-1

dbx 530 Parametric Equalizer (500 Series Module)

Warm Audio EQP-WA Pultec Tube Equalizer-1

Warm Audio EQP-WA Pultec Tube Equalizer

Rolls RPQ160b Single-Channel 4-Band Parametric Equalizer

Home Equalizers Rolls RPQ160b Single-Channel 4-Band Parametric Equalizer
was $279.00 Special Price $229.00

Single-Channel 4-Band Parametric EQ, 1U Rackmount, 70 Hz to 20 kHz Overlapping Bands, Sweepable High-Pass and Low-Pass Filters, 12 dB per Octave Rolloff, T-Filter Low-Distortion Circuit, Balanced and Unbalanced XLR/Quarter-Inch/Barrier I/O, Feedback and Room Tuning

Availability: In Stock
SKU
RPQ160b

Rolls RPQ160b Features:

  • FOUR FULLY PARAMETRIC BANDS: four overlapping bands from 70 Hz to 20 kHz shape any single channel
  • SWEEPABLE HIGH-PASS AND LOW-PASS: independent high-pass and low-pass filters roll off unwanted extremes
  • T-FILTER CIRCUIT: low-distortion T-filter design keeps EQ transparent and quiet
  • BALANCED AND UNBALANCED I/O: XLR, quarter-inch, and barrier-strip connectors accept balanced or unbalanced sources
  • FEEDBACK NOTCHING: precise narrow-band cuts ring out feedback in live and install systems
  • SINGLE RACK SPACE: professional single-channel EQ power in a compact 1U chassis

Rolls RPQ160b: Four Parametric Bands to Shape Any Channel

The Rolls RPQ160b is a single-channel, four-band parametric equalizer with independent high-pass and low-pass filters, housed in a single rack space measuring 19 by 1.75 by 4 inches. A parametric EQ gives you precise control over the frequency, width, and level of each band, which is what you need to notch out feedback, tame a room resonance, or shape one microphone or instrument in detail. Its four overlapping bands cover roughly 70 Hz to 20 kHz, and sweepable high-pass and low-pass filters trim the extremes. The signal path uses low-distortion T-filter circuitry, and the unit offers balanced and unbalanced connections on several connector types. For live sound, install tuning, or broadcast conditioning on a single channel, the RPQ160b is a focused, capable processor.

Four Fully Parametric Overlapping Bands, 70 Hz to 20 kHz

The RPQ160b's four fully parametric bands overlap to cover approximately 70 Hz to 20 kHz, letting you place a precise boost or cut anywhere across the audible range. Fully parametric means each band offers control over its center frequency, its bandwidth or Q, and its gain, unlike a graphic EQ with fixed frequencies. Overlapping bands let two adjacent bands work the same region for surgical corrections, such as pulling down a single ringing frequency without disturbing everything around it. That precision is what separates a parametric from the broad strokes of a tone control. For an engineer chasing a specific problem frequency on a channel, four overlapping parametric bands provide the exact tool to isolate and fix it.

Sweepable High-Pass and Low-Pass Filters

In addition to its four bands, the RPQ160b includes a sweepable high-pass filter adjustable from 16 Hz to 500 Hz and a low-pass filter from 1 kHz to 20 kHz, each rolling off at 12 dB per octave. A high-pass filter removes low-frequency energy below its setting, ideal for cutting stage rumble, handling noise, or subsonic content that only wastes amplifier headroom. The low-pass filter trims high-frequency hiss or harshness above its setting. Because both are continuously sweepable rather than fixed, you place the rolloff exactly where the source needs it. For a live vocal channel plagued by low-end thump or a source with too much top-end sizzle, these adjustable filters clean up the extremes before the parametric bands do their detailed work.

Low-Distortion T-Filter Circuit

The RPQ160b builds its equalization on T-filter circuits, a design chosen for low noise and low distortion. The T-filter topology allows boost and cut with minimal added coloration or phase disturbance, so the EQ changes the tone you intend without smearing the rest of the signal. Clean filter circuitry matters most when you are cutting a narrow band hard to kill feedback, because a noisy or ill-behaved filter would add its own artifacts. Transparent operation is exactly what an install or broadcast engineer wants from a corrective EQ. For applications where the EQ must fix a problem and otherwise stay invisible, the low-distortion T-filter design is the reason the RPQ160b earns a place in the rack.

Balanced and Unbalanced I/O on Multiple Connectors

The RPQ160b accepts and delivers signal on multiple connector types, XLR, 1/4-inch, and barrier strip, and works with both balanced and unbalanced lines, presenting 10k ohm unbalanced or 20k ohm balanced at its input and a low 50 ohm output impedance. Offering several connector formats means the unit ties into a professional console, a consumer source, or a hard-wired install without adapters. A balanced connection rejects noise on long runs, while the low 50 ohm output drives the next device without level loss. That connector flexibility is deliberately install-friendly, since a fixed system may present any of those formats. For an integrator dropping a single-channel EQ into an existing rack, the RPQ160b connects however the system requires.

For Feedback Control, Install Tuning, and Broadcast

The RPQ160b is built for engineers who need precise single-channel equalization: notching feedback in live sound, tuning install and PA systems, shaping an individual microphone or instrument, performing room correction on one channel, and conditioning broadcast audio. Powered from an external supply and occupying one rack space, it drops into a signal chain wherever a single channel needs detailed control. Because it is one channel rather than a stereo or multi-channel unit, all of its controls serve that one path, giving you more resolution than a shared processor. Its transparent filters make it as suited to gentle tone shaping as to aggressive feedback hunting. For focused, high-resolution EQ on a single line, the RPQ160b is purpose-made.

More Information
MPN RPQ160b
Color Black
Input XLR / 1/4" / barrier (balanced & unbalanced)
Power Source AC Mains
Size 19" x 1.75" x 4" (1U)
Form Parametric Equalizer
Output XLR / 1/4" / barrier
Channels Mono
UPC / EAN 675889016000
Brand Rolls Corporation
Product Condition New
Availability In Stock

Rolls RPQ160b Specifications

TypeSingle-channel, 4-band parametric EQ with high- and low-pass filters
FormatSingle rack space (1U), 19-inch rackmount
EQ Range4 overlapping bands, 70 Hz to 20 kHz combined
High-Pass Filter16 Hz to 500 Hz adjustable, 12 dB/octave
Low-Pass Filter1 kHz to 20 kHz adjustable, 12 dB/octave
Input Impedance10k-ohm unbalanced, 20k-ohm balanced
Output Impedance50 ohm
ConnectorsXLR, quarter-inch, and barrier-strip (balanced and unbalanced)
Filter DesignT-filter EQ circuits (low distortion)