Rolls RMS270 1U Rack Tray for Two Rolls Half-Rack Units

Rolls RMS270: Two Half-Rack Units in One Rack Space

The Rolls RMS270 is a 1U rack tray that mounts two Rolls half-rack units side by side in a single 19-inch rack space. Many of the most useful Rolls processors are half-rack width, and without a tray they sit loose on a shelf or take up a full rack space each; the RMS270 solves that by turning two half-rack boxes into one tidy, screwed-in rack unit. It accepts any combination of compatible Rolls half-rack products and is built from vinyl-covered steel for a secure, professional install. A companion HR271 filler panel covers the empty side when you only need to mount one unit. For anyone building a rack of Rolls gear, the RMS270 is the mounting hardware that makes it look and stay right.

Holds Any Combination of Compatible Half-Rack Units

The RMS270 holds two Rolls half-rack units in any combination; models such as the HR72, HR73, HR78, MX153, and HR155 all fit side by side, and a wider unit like the MX152 occupies one side on its own. Half-rack gear is designed to pair two-across in a standard 19-inch rack, and this tray provides the exact width and mounting points to do that. Because it accepts mixed combinations, you can pair, for example, a headphone amp on one side and a matching box on the other in the same rack space. That flexibility means the tray adapts to whatever pair of Rolls units your system needs rather than locking you to one model. For a studio or install rack that mixes several small Rolls processors, one tray consolidates two of them cleanly.

Steel Construction with an HR271 Filler Option

Built from vinyl-covered steel, the RMS270 gives half-rack units a rigid, grounded home that holds up to the vibration and handling of permanent and portable racks alike. Steel construction resists flexing when the rack is moved, so mounted units stay square and their connectors stay seated. When you only need to mount a single half-rack unit, the companion HR271 filler panel covers the empty compartment for a finished front-panel appearance. That keeps the rack looking intentional rather than leaving an open gap. For integrators who care how a rack presents to a client, the steel tray and matching filler are the difference between a clean install and a loose shelf.

For Studios and Integrators Organizing Rolls Racks

The RMS270 is for anyone rack-mounting Rolls half-rack processors: studios consolidating small utility boxes, integrators building install racks, and touring or portable rigs that need half-rack gear locked down. It is a passive mounting accessory with no audio path of its own, so it adds nothing to the signal and simply organizes the hardware. Pairing two units per rack space also saves valuable rack real estate in a crowded system. Combined with the HR271 filler for single-unit jobs, it covers both the two-across and one-across mounting cases. For a neat, secure Rolls rack, the RMS270 is the tray that gets the job done.