Desktop Gooseneck Mic Pedestal, Built-In Push-to-Talk / Push-to-Mute Switch, Passive No Electronics or Distortion, 6-Inch Gooseneck, Heavy 0.090-Inch Steel Chassis, 5x5-Inch Weighted Base, XLR In and Out, Bottom-Panel Mounting Holes
The Rolls MS211 is a passive desktop microphone pedestal with a 6-inch gooseneck and a built-in push-to-talk or push-to-mute switch, built for paging, dispatch, and talkback stations. It combines a stable weighted base, a positionable gooseneck, and clean mic muting into a single unit, so an operator has a ready microphone and instant control in one place. The switch action is momentary and can be configured for either talk or mute via an internal switch, and the whole pedestal is passive with no electronics in the signal path. A heavy 0.090-inch steel chassis keeps it planted on a busy desk. For reception desks, podiums, and dispatch positions that need a dependable talk mic, the MS211 is a purpose-built pedestal.
The MS211's built-in switch provides momentary push-to-talk or push-to-mute action, selectable through an internal switch reached from the side of the base. Momentary operation means the mic is live, or muted, only while the operator holds the switch, which is exactly the behavior a paging or dispatch position needs for quick, controlled announcements. Configuring the sense lets the same pedestal suit a room where the mic normally sits muted or one where it sits open. Because the switching is passive, it adds no noise or distortion to the microphone signal. For an announcement desk where an operator needs to speak on demand and never leave the mic hot by accident, that configurable momentary switch is the core of the MS211.
The MS211 is built on a 0.090-inch steel chassis, roughly three times thicker than typical, giving it a low center of gravity and a stable, weighted base measuring 5 by 5 by 1.5 inches. A heavy base keeps the pedestal from sliding or tipping when an operator reaches for the switch on a busy desk. The signal path is entirely passive, with no power, no electronics, and no added distortion between the microphone and the XLR output. Bottom-panel screw holes let the pedestal be permanently mounted to a counter or podium when needed. For an install that has to survive constant daily use, that rugged steel build is what keeps the MS211 in service.
The MS211 carries a 6-inch gooseneck that positions a microphone where the operator needs it, with balanced XLR input and output connections. A gooseneck holds its shape once bent, so the mic stays aimed at the speaker without drifting through a shift. The XLR input accepts the operator's microphone and the XLR output carries the switched signal on to the mixer or paging system. Because the pedestal passes a standard balanced signal, it drops into any XLR-based system without special wiring. For a podium or reception desk where the mic has to stay put and reach the right height, the gooseneck and clean XLR connections make setup simple.
The MS211 is built for desktop paging and announcement stations, push-to-talk conferencing and dispatch, podium and reception-desk microphones, and broadcast talkback positions. A dispatcher can hold the switch to talk and release to cut the mic, keeping the channel clean between calls. A receptionist or podium user gets a stable, always-ready microphone that mutes or opens with a single press. Because it is passive and uses standard XLR, it integrates with existing paging and conference systems without added power or electronics. For any staffed desk that needs a dependable, controllable talk microphone, the MS211 delivers the stand and the switch in one rugged unit.
| MPN | MS211 |
|---|---|
| Color | Black |
| Input | XLR |
| Power Source | Passive |
| Size | 5in x 5in base, 6in gooseneck |
| Form | Mute Switch |
| Output | XLR |
| Channels | Mono |
| UPC / EAN | 675889002119 |
| Brand | Rolls Corporation |
| Product Condition | New |
| Availability | In Stock |
| Function | Passive desktop gooseneck mic pedestal with push-to-talk / push-to-mute switch |
| Connectors | XLR input and XLR output |
| Switch | Momentary talk or mute, configurable push-to-talk or push-to-mute (internal switch) |
| Gooseneck | 6-inch |
| Base Size | 5 x 5 x 1.5 inches |
| Chassis | 0.090-inch steel (about three times typical thickness) |
| Mounting | Bottom-panel screw holes |
| Power | Passive, no power required |