Rolls MM11 Pro MicMute Switchable Push-to-Talk / Push-to-Mute Microphone Switch

Rolls MM11 Pro: Momentary Push-to-Talk and Push-to-Mute for Any XLR Microphone

The Rolls MM11 Pro is a passive inline XLR microphone switch that gives any balanced mic instant push-to-talk or push-to-mute control through a single large actuator. It sits in the mic line between the microphone and the mixer or interface, adding hands-free muting without touching the console fader. The Pro version adds momentary switching over the base MM11, so the mic is live only while you hold the switch or muted only while you press it. A large actuator makes it operable by hand or foot, and the whole unit is passive with no power supply or batteries to manage. For podcasters, broadcasters, and paging operators who need to kill or open a mic instantly and silently, the MM11 Pro is the simplest reliable way to do it.

Silent Muting That Passes Phantom Power

The MM11 Pro provides roughly 60 dB of attenuation when muted, dropping the microphone far enough to be effectively silent, and it passes +48V phantom power straight through without popping when you toggle it. Muting a phantom-powered condenser is where lesser switches fail: interrupting the signal path can send a loud thump through the system as the phantom voltage settles. The MM11 Pro is built to switch cleanly under phantom, so a cough cut during a live stream never becomes an audible pop. Because it passes the DC rather than blocking it, your condenser stays powered and ready the instant you unmute. For anyone running a condenser mic on a live feed, that pop-free muting is the feature that separates a usable switch from a distracting one.

Large Hand- or Foot-Operable Actuator

A single large actuator switch dominates the MM11 Pro, sized to be pressed confidently by hand on a desk or stepped on as a foot switch on the floor. Momentary action means the switch does its job only while pressed, returning to its resting state the moment you let go, which is ideal for a quick cough mute or a push-to-talk announcement. Because there are no electronics to power, there is nothing to fail, drift, or add noise to the signal. The rugged inline body simply carries the balanced audio on male and female XLR connectors with the switch in the middle. For a busy talk setup where hands are on a keyboard or an instrument, being able to work the mute with a foot keeps the workflow moving.

Built for Podcasting, Broadcast, and Paging

The MM11 Pro drops into podcasting and streaming rigs as an instant cough and mute control, live broadcast and recording chains as a talk and mute switch, and paging systems as a push-to-talk button. Its passive inline design means it works with any balanced dynamic or condenser microphone and any mixer or interface with XLR connections. Foot operation makes it a natural fit for tasks where both hands are busy, from tracking an instrument to running a board. Because it needs no power and adds no coloration, it can live permanently in a mic line and simply wait to be used. For content creators and announcers who need dependable, silent mic control, the MM11 Pro covers the job without a single setting to configure.