Four-Channel Stereo Headphone Amplifier, One Stereo Source to Four Outputs, Dual 1/4-Inch and 1/8-Inch Jacks per Channel, Independent Per-Channel Level Controls, 20 dB Gain per Channel, Under 0.008% THD, All-Metal Half-Rack Chassis
The Rolls HA43 Pro is a four-channel stereo headphone amplifier that takes one stereo input and splits it into four separately controlled headphone feeds inside a 4.15 by 3.45 by 1.16 inch all-metal chassis. It exists to solve the everyday tracking-room problem of getting the same monitor mix to several sets of headphones while letting each listener set their own volume. A single stereo source feeds all four outputs, every channel has its own level knob, and the whole unit runs off an included external DC supply. With very low distortion and generous output, it drives everything from earbuds to high-impedance studio cans. For any studio, edit suite, or listening station where more than one person needs headphones off one feed, the HA43 Pro is built to be exactly that and nothing more.
The heart of the HA43 Pro is four independent stereo headphone outputs, each with its own front-panel level control and up to 20 dB of gain per channel. Because the amplifier buffers and re-amplifies the source separately for every output, one listener can crank their volume while another keeps it low, and neither change affects the shared source. Distributing one mix this way is how a control room keeps a singer, an engineer, and two musicians all on the same take at four different comfort levels. Each output pulls from the common stereo input, so there is nothing to route or patch beyond plugging in headphones. For a four-person overdub session or a language lab bench, those four private volume controls are the reason a distribution amp beats a simple headphone splitter.
Every one of the four outputs carries both a 1/4-inch TRS jack and a 1/8-inch (3.5mm) TRS jack, so any headphone plugs in without an adapter. Full-size studio headphones use the 1/4-inch connector while consumer earbuds and portable cans use the 3.5mm, and the HA43 Pro simply provides both on each channel. That means a mixed room of pro and consumer headphones all connect directly, and two people can even share one channel across the two jack sizes. Not hunting for adapters at the start of a session is a small thing that saves real time. For a broadcast guest position or a classroom listening station, dual jacks make the amp instantly compatible with whatever headphones walk in the door.
The HA43 Pro specifies total harmonic distortion under 0.008 percent, a signal-to-noise ratio greater than 90 dB, and flat 20 Hz to 20,000 Hz frequency response, delivering up to one watt of total output. In practice that means the amplifier adds almost no hiss or coloration, so what reaches the headphones is the monitor mix as it was recorded. A quiet noise floor matters most during soft passages and silent moments, when a noisy amp would be audible in the cans. Low distortion keeps a loud monitor level clean rather than harsh, which protects both the mix decisions and the listener's ears. For critical tracking where players trust the headphone feed to perform against, that transparent amplification is what makes the HA43 Pro a working studio tool.
At 4.15 by 3.45 by 1.16 inches and one pound, the HA43 Pro is a compact all-metal box that sits on a desk, mounts in a half-rack tray, or tucks beside a workstation. Its rugged steel chassis stands up to the daily handling of a studio or road setup rather than flexing like a plastic consumer splitter. An included external DC power supply keeps the transformer and its hum field outside the audio chassis, which helps preserve the low noise floor. The small footprint means it lives at the front of the desk where the volume knobs are in easy reach. For a crowded control surface or a portable recording rig, that dense, solid build puts four headphone mixes exactly where the musicians sit.
The HA43 Pro is built for any situation where up to four people need to hear one source at their own level. In a recording studio it feeds a band tracking together, letting each musician dial in their own headphone volume off the same monitor mix. In podcast and broadcast work it gives every guest around the table a private headphone feed from the show output. Language labs, transcription desks, and video edit suites use it as a multi-listener monitoring hub where several people audition the same program. Because it distributes and amplifies rather than just splitting, none of those listeners loads down the others. For studios, schools, and AV rooms that outgrew a single headphone jack, the HA43 Pro is the clean, quiet way to share one mix four ways.
| MPN | HA43 Pro |
|---|---|
| Input | 1/4" TRS stereo, Dual RCA |
| Power Source | AC Mains |
| Size | 4.15" x 3.45" x 1.16" |
| Form | Headphone Amplifier |
| Output | 4x 1/4" TRS, 4x 1/8" TRS |
| Channels | Stereo |
| Output Power | 1 W total |
| UPC / EAN | 675889004311 |
| Brand | Rolls Corporation |
| Product Condition | New |
| Availability | In Stock |
| Channels | 4 independent stereo outputs |
| Input Impedance | 100K Ohms unbalanced |
| Max Input Level | +14 dBV |
| Inputs | 1/4" TRS stereo, dual RCA |
| Outputs | 4x 1/4" TRS stereo, 4x 1/8" (3.5mm) TRS stereo |
| Max Gain | 20 dB/channel |
| S/N Ratio | >90 dB |
| THD | <0.008% |
| Frequency Response | 20 Hz - 20,000 Hz |
| Total Output Power | Up to 1 watt |