Rode WS3 Wind Shield for NT3 and M3 Microphones-1

Rode WS3 Foam Pop Filter Windshield for NT3 and M3 Microphones

Rode WS8 Deluxe Microphone Wind Shield-1

Rode WS8 Deluxe Furry Windshield for NT5, NT55, NT6, M5 and TF-5

Rode WS5 Foam Pop Filter for NT5, NT55, NT6, M5 and TF-5 Mics

Home Windscreens / Pop Filters Rode WS5 Foam Pop Filter for NT5, NT55, NT6, M5 and TF-5 Mics
was $39.00 Special Price $29.00

Foam Pop Filter for Rode Small-Diaphragm Pencil Condensers, Open-Cell Acoustic Foam, Fits 0.79 to 1.06 in (20 to 27 mm) Capsules, Plosive and Light Wind-Noise Control, Slip-On Fit, NT5 NT55 NT6 M5 TF-5 Compatible

Availability: In Stock
SKU
WS5

All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.

Rode WS5 Features:

  • PENCIL-MIC SIZED: Fits any small-diaphragm condenser with a 0.79 to 1.06 in (20 to 27 mm) capsule
  • PLOSIVE CONTROL: Open-cell foam softens hard-consonant air bursts before they reach the diaphragm
  • LIGHT WIND DEFENSE: Cuts breeze and HVAC-draft rumble for a cleaner noise floor
  • ACOUSTICALLY TRANSPARENT: Preserves the detail small-diaphragm mics are prized for
  • WIDE COMPATIBILITY: Ready for NT5, NT55, NT6, M5, and TF-5 pencil condensers
  • SLIP-ON SIMPLE: On and off in a second with no tools and almost no added weight

Rode WS5: Foam Pop Protection for Your Pencil Condensers

The Rode WS5 is a high-quality foam pop filter for Rode small-diaphragm "pencil" condenser microphones, sized to fit any capsule from 0.79 to 1.06 in (20 to 27 mm) across. Small-diaphragm mics are prized for their fast, detailed, honest sound, and that same sensitivity makes them quick to react to plosive air and wind. The WS5 slips over the capsule end and knocks those problems down without dulling the detail you bought the mic for. It is the small, essential accessory that keeps a pencil mic clean on any source.

How Open-Cell Foam Tames Plosives and Drafts

Open-cell acoustic foam is built from a dense web of tiny interconnected air pockets. When the burst of air from a plosive consonant or a puff of wind hits it, that turbulent airflow loses its energy weaving through the cells and dissipates, while the sound-pressure waves you actually want to record pass through largely intact. On a sensitive pencil condenser, that means the low-frequency thump of a hard "p" or the rumble of a draft across the capsule never reaches the diaphragm, so your recording stays clean instead of fighting pops and roar.

Why It Fits a Whole Family of Small-Diaphragm Mics

Rode's small-diaphragm condensers share a common capsule size, which is why one windshield covers so many of them. The WS5 fits any microphone with a capsule between 0.79 and 1.06 in (20 to 27 mm) in diameter, which includes the NT5, NT55, NT6, M5, and TF-5. If you own a matched pair for stereo work, a WS5 on each mic keeps both channels protected identically. That common fit also makes the WS5 a smart spare to keep in the bag, ready for whichever pencil mic comes out for the session.

Where the WS5 Belongs — Indoors and Out

Small-diaphragm condensers earn their keep on acoustic guitar, overheads, piano, strings, and as room and ambience mics, and every one of those jobs benefits from foam protection. Up close, the WS5 controls plosives and breath. In an untreated room it reduces the draft rumble from vents and fans that quietly raises your noise floor. Outdoors in a light breeze it keeps ambience and field recordings usable. For strong, sustained wind you would step up to a furry windshield, but for everyday plosive and draft control the WS5 is exactly right.

Who the Rode WS5 Is For

This is the everyday essential for anyone recording with Rode pencil condensers. For the home and project studio, it is easy insurance against ruined takes on guitar, overheads, and room mics. For the stereo recordist running a matched pair, it protects both mics the same way. And for the working engineer, it is the reliable, wide-fitting foam that lives with the mics and comes out on every session.

More Information
MPN WS5
Color Gray
UPC / EAN 698813000739
Brand Rode
Product Condition New
Availability In Stock

Rode WS5 Specifications

TypeFoam pop filter / windshield
Designed ForRode small-diaphragm condenser (pencil) microphones
Capsule Fit0.79 to 1.06 in (20 to 27 mm) diameter
Compatible ModelsNT5, NT55, NT6, M5, TF-5
MaterialOpen-cell acoustic foam
FunctionPlosive and light wind-noise reduction
MountingSlip-on friction fit