Rode Wireless GO (Gen 3) Compact Wireless Microphone System with 32-bit Float Recording

Rode Wireless GO (Gen 3): The Clip-and-Go Wireless System That Records Itself

You clip a transmitter to your shirt, mount the receiver on your camera, and hit record — and for the first time in the Wireless GO line, every transmitter is also a 32-bit float field recorder writing a safety backup the entire time. The Wireless GO (Gen 3) is a compact two-person wireless microphone system built for the creator who shoots alone and cannot afford a ruined take. Two transmitters, one receiver, and the same Series IV 2.4 GHz digital engine that holds a stable, encrypted link out to 853 ft line of sight. Whether you are vlogging, running an interview, or capturing dialogue for a film, this is the system that disappears on the talent and still delivers broadcast-clean audio.

Why 32-bit Float On-Board Recording Changes How You Shoot

The single biggest upgrade in the Gen 3 is internal recording. Each transmitter captures a 32-bit float WAV to 32 GB of on-board memory — over 40 hours per unit — at the same time it broadcasts to the receiver. If the wireless link drops, if the subject suddenly shouts and clips, or if you set the gain too low, the recovered file from the transmitter still has the audio. 32-bit float means the recording holds enormous dynamic range, so a take that looks clipped or buried can be pulled back to a usable level in your editor. For the run-and-gun filmmaker and the documentary shooter, this is the difference between a salvageable shoot and a wasted day.

Wireless PRO Capsules and GainAssist Do the Level-Setting for You

The built-in microphones are inherited directly from the flagship Wireless PRO — upgraded capsules and preamps with cleaner clarity and more headroom before overload. Pair that with GainAssist, the intelligent automatic level control that balances the signal at the receiver based on how loud your subject actually is, and you stop guessing at gain on set. A quiet interviewee and a loud presenter both arrive at a usable level. When you want control, granular manual gain and tailored camera presets for DSLR, mirrorless, and phone are right there. First-timers get audio that just works; experienced shooters keep the override.

USB-C, 3.5mm, and Direct Connect Bluetooth — Every Workflow Covered

The receiver outputs over a 3.5mm analog jack for cameras and over USB-C for phones, tablets, and computers — where it shows up as a USB microphone with no interface required. Need to travel even lighter? Direct Connect lets you pair a transmitter straight to an iOS phone over Bluetooth using the Rode Capture app, leaving the receiver at home entirely. The locking 3.5mm TRS input on each transmitter accepts external lavalier mics with plug-in power detect, so your favorite lav stays put and your runtime extends. The included USB-C to Lightning, USB-C to USB-C, and TRS cables plus the SC33 charging hub mean it connects to whatever you already own.

Battery, Range, and the Build That Earns a Full Shoot Day

Each unit runs up to 7 hours on its built-in lithium-ion battery and recharges over USB-C in about 1.5 hours, so the system covers a full event or production day. The 853 ft line-of-sight range is more than any real-world shoot demands, and the high-visibility OLED displays on both the transmitters and receiver let you confirm levels and status at a glance. If you are upgrading from a Wireless GO II, the locking input, on-board recording, and Wireless PRO capsules are the three reasons to move — and if this is your first wireless system, it is the one that grows with you instead of being outgrown.