Studio-Grade Suspension Shock Mount, For Rode Large-Diaphragm Condenser Microphones, Detachable Pop Filter with Two Axes of Adjustment, Telescopic Positioning Arm, Rumble and Vibration Isolation, 5/8-Inch Thread with 3/8-Inch Adapter, NT1-A / NT2-A / NT1000 / NT2000 / NTK / K2 Compatible
All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.
The Rode SM6 is a studio-grade suspension shock mount for large-diaphragm condenser microphones, with a detachable pop filter and a telescopic positioning arm built into a single unit. It does two jobs at once that a bare mic stand cannot: it suspends the microphone in an elastic cradle so structure-borne vibration never reaches the capsule, and it holds a plosive screen exactly where the voice needs it. For anyone recording a vocal or a voiceover, it is the small piece of hardware that turns a good microphone into a clean, professional-sounding one you can set up once and trust every session.
A condenser capsule is sensitive enough to hear vibrations traveling through solid objects, not just sound moving through the air. A footstep on the floor, a knee against the desk, a keyboard, or a passing truck all send low-frequency energy up the stand and into a rigidly clamped microphone, where it prints as rumble and thumps under the take. The SM6 breaks that path by suspending the microphone in an elastic web rather than bolting it to the stand: the flexible cradle absorbs and dissipates mechanical energy before it can reach the capsule, isolating the mic from the knocks and bumps around it. The result is a quieter noise floor and takes that do not need high-pass filtering to rescue them later.
Plosives are the bursts of air your mouth pushes out on hard consonants like p, b, and t. That moving air hits a condenser capsule as a sudden pressure spike, producing the low-frequency thump that ruins otherwise clean vocal takes. The SM6 mounts a pop shield directly in front of the capsule so the blast of air is diffused and slowed before it arrives, while the voice passes through intact. Because the filter is built into the mount rather than clamped on separately, it stays perfectly aligned with the microphone every time, and it detaches completely when you want the mic bare for instruments or room capture.
Vocalists are not all the same height, and no two singers work the microphone from the same distance. The SM6 answers that with a pop filter that pivots on two axes and rides on a telescopic arm, so you can set the exact gap between mouth and capsule and angle the screen to the source. Move it in close for an intimate, proximity-rich vocal, or extend it out for a singer who steps back on loud passages. Once it is dialed in, the placement holds, so every session starts from the same repeatable position.
The SM6 is engineered around the body size of Rode large-diaphragm studio condensers, and it fits the NT1-A, NT2-A, NT1000, NT2000, NTK, and K2. It attaches to any stand or boom arm through a standard 5/8-inch thread, and an included 3/8-inch adapter lets it drop straight onto European-thread stands and studio arms as well. That means the mount you buy for the microphone also works with the studio hardware you already own, with no extra adapters to source.
Reach for the SM6 any time a large-diaphragm Rode condenser is going in front of a voice. For lead vocals it delivers the two things a clean take demands at once, isolation from the room and control over plosives, so the performance is what gets recorded and not the desk it sits on. For voiceover, narration, and podcasting it keeps the read consistent from session to session because the mic and screen return to the same position every time. And when the same microphone moves to an acoustic instrument or a room source, the pop filter lifts away and the suspension keeps doing its job.
This is the mount for the home-studio recordist who just bought an NT1-A or NT2-A and wants it to sound its best, for the podcaster or voice actor who needs takes free of thumps and pops, and for the engineer upgrading from a rigid clip to a proper suspension system. If you own a Rode large-diaphragm condenser and you record voices, the SM6 is the accessory that lets the microphone perform to its full potential.
| MPN | SM6 |
|---|---|
| Color | Black |
| UPC / EAN | 698813001477 |
| Brand | Rode |
| Product Condition | New |
| Availability | Out of Stock |
| Type | Studio suspension shock mount with detachable pop filter |
| Microphone Compatibility | Rode large-diaphragm condensers — NT1-A, NT2-A, NT1000, NT2000, NTK, K2 |
| Isolation | Elastic suspension cradle isolates rumble and mechanical vibration |
| Pop Filter | Detachable, two axes of adjustment |
| Positioning Arm | Telescopic pop-filter arm |
| Stand Thread | 5/8-inch, with 3/8-inch adapter included |