3.5mm TRRS to TRRS Patch Cable, 12-Inch (30 cm) Length, Right-Angle Connectors, Two-Segment Design with Junction Box, Ultra-Flexible Mic Segment, Reinforced Memory-Cable Camera Segment, Gold-Plated Contacts, Shielded Construction
All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.
The Rode SC10 is a high-quality 3.5mm TRRS to TRRS patch cable, 12 inches (30 cm) long, designed to connect a camera-mount microphone such as the VideoMic NTG to DSLR-style cameras or mobile devices. What makes it more than a plain short lead is how it is engineered along its length: two different cable segments, joined by a junction box, each doing a specific job. For the run-and-gun shooter, it is the difference between a rig that stays quiet and tidy and one that rattles and snags.
The two halves of the SC10 are built for opposite demands. The segment at the microphone end is ultra-flexible and stays limp, which is exactly what a shock mount needs: a stiff cable would transmit handling and vibration straight into the mount and undo its isolation, while a soft one lets the shock mount do its job. The segment at the camera end is a reinforced memory cable that holds whatever shape you bend it into, so you can route it cleanly around a camera body and it will stay there instead of springing loose. The junction box in the middle joins the two and adds strain relief.
Both ends terminate in low-profile right-angle 3.5mm TRRS connectors, which sit flat against the microphone and the camera rather than sticking out to catch on bags, gimbals, and cages. The cable is shielded and uses gold-plated contacts, so the audio passes from mic to camera cleanly and resists the interference a longer or unshielded lead can pick up. The TRRS wiring makes it equally at home feeding a mobile device that expects a four-conductor connection.
It is for the videographer, vlogger, and mobile filmmaker running an on-camera microphone like the VideoMic NTG on a DSLR, mirrorless camera, or phone. If you want the mic to mount, connect, and stay out of the way without adding noise or clutter to the rig, the SC10 is the patch cable engineered for exactly that setup.
| MPN | SC10 |
|---|---|
| UPC / EAN | 698813006731 |
| Brand | Rode |
| Product Condition | New |
| Availability | In Stock |
| Type | TRRS to TRRS patch cable |
| Connectors | Right-angle 3.5mm TRRS (both ends) |
| Length | 12 in (30 cm) |
| Construction | Two segments joined by a junction box (flex segment plus memory cable) |
| Shielding | Shielded |
| Contacts | Gold-plated |
| Designed For | VideoMic NTG to DSLR-style cameras or mobile devices |