Rode RM3 Durable Mic Clip for M2, M3, NT3 and NT4

Rode RM3: The Durable Clip for Mid-Diameter Rode Mics

The Rode RM3 is a durable stand-mount clip for mid-diameter microphones, sized for bodies around 1.26 in (32 mm) across. It cradles the microphone firmly on any stand without touching its acoustics, and it carries a 3/8-inch thread plus a 5/8-inch adapter to fit the stand you own. For the performer or recordist running a Rode M-series or NT-series mic in this body size, it is the tough, correct holder that keeps the mic in place.

A Clip Sized to the Microphone

A clip that is too loose lets a microphone tilt or drop, and one that is too tight is a fight every time you load it. The RM3 cradle is sized specifically for mic bodies around 1.26 in (32 mm) in diameter, so it accepts the intended microphones snugly and holds them without strain. The durable clip body takes the repeated loading and unloading of real-world use, and it grips the mic without affecting its polar pattern or frequency response, so what you mount is what you hear.

Position It, Then Fit Any Stand

Because the RM3 lets you tilt and position the microphone on the stand, you can aim it at a source and lock the angle, whether that is an amp, an instrument, or a voice. When it comes to mounting, a 3/8-inch thread and an included 5/8-inch adapter cover both stand-top sizes used across stages and studios, so the clip goes onto a house stand, a studio tripod, or a boom without a search for adapters.

Who the Rode RM3 Is For

The RM3 is for musicians, engineers, and field recordists who mount the Rode M2, M3, NT3, or NT4 and want a clip built to hold and to last. It is the correct clip for those microphones on a new setup and the ideal replacement when a stock clip goes missing or wears out. If you run one of these Rode mics on a stand, the RM3 is the durable cradle made to fit it.