Free Shipping on Orders Over $59
|
Rode PG2-R Pro Cable - XLR Mic Cable with Junction Box for PG2-R and SM Mounts
was
$139.00
Special Price
$109.00
Professional XLR Microphone Cable, Integrated Strain-Relief Junction Box, Right-Angle and Straight XLR Connectors, Designed for PG2-R Pistol Grip and SM-Series Shock Mounts, 17-Inch (43 cm) Length, Rugged Broadcast-Grade Build
Availability:
In Stock
SKU
PG2 Pro Cable
All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.
Rode PG2-R Pro Cable Features:
- PURPOSE-BUILT FIT: sized and shaped to route neatly through the PG2-R pistol grip and RODE SM-series shock mounts
- STRAIN-RELIEF JUNCTION BOX: an integrated box takes the mechanical stress off the connectors so the run survives constant rigging and de-rigging
- PROFESSIONAL-GRADE CONNECTORS: broadcast-quality 3-pin XLR terminations for a locking, reliable balanced connection
- RIGHT-ANGLE ROUTING: an angled plug keeps the cable low and tidy at the microphone end for boom and grip work
- ROAD-READY BUILD: a rugged short run made to hold up to location, studio, and field use day after day
Rode PG2-R Pro Cable: The Purpose-Built Link Between Your Mic Mount and Your Recorder
The Rode PG2-R Pro Cable is a professional XLR microphone cable with an integrated strain-relief junction box, built specifically for the RODE PG2-R Pistol Grip and SM-series shock mounts. At roughly 17 inches (43 cm) it is not a general-purpose mic lead; it is the short, rugged run designed to carry balanced audio out of a shock-mounted microphone with the least possible strain on the connectors. For the boom operator and location recordist, it is the small part that keeps a shot quiet, tidy, and reliable.
Why the Junction Box Matters
Balanced XLR connectors are strong electrically but vulnerable mechanically - repeated flexing right at the plug is what eventually causes crackle and dropout. The PG2-R Pro Cable answers that with an integrated junction box that absorbs the mechanical stress of handling, so the pull of a boom swing or a quick de-rig is taken by the box rather than by the solder joints inside the connector. Professional-grade 3-pin XLR terminations carry a clean, balanced signal, and the right-angle plug at the microphone end keeps the cable close and out of frame.
Built Around the PG2-R and SM Series
This cable is a system component, not an accessory chosen at random. Its length and its angled connector are matched to the geometry of the RODE PG2-R pistol grip and the SM-series shock mounts, so it seats into their cable channels without excess slack to rattle or snag. That precise fit is what separates a purpose-built mount cable from a generic patch lead: nothing droops into the shot, nothing pulls on the shock mount, and the isolation the mount provides is not compromised by a stiff, ill-fitting cable.
Who the PG2-R Pro Cable Is For
It is for the boom operator, the film and video sound recordist, and anyone running a shotgun or studio mic in a RODE PG2-R grip or SM-series mount who wants a replacement or spare that fits exactly right. Keep one in the kit and a worn or damaged mount cable never ends a session, because the link between microphone and recorder is the one part you cannot improvise on set.
| MPN | PG2 Pro Cable |
|---|---|
| Color | Black |
| UPC / EAN | 698813004652 |
| Brand | Rode |
| Product Condition | New |
| Availability | In Stock |
Rode PG2 Pro Cable Specifications
| Type | Microphone XLR cable with junction box |
| Connectors | Professional-grade 3-pin XLR (male and female) |
| Length | 17 in (43 cm) |
| Junction Box | Integrated strain-relief |
| Designed For | RODE PG2-R Pistol Grip and SM-series shock mounts |