Radial USB-Pro Stereo USB DI, 24-bit/96kHz Laptop Playback Interface, XLR Out

Radial USB-Pro: The Clean, Reliable Bridge From Laptop to PA

The Radial USB-Pro is a stereo USB direct box, a high-resolution digital audio converter that connects a laptop over a single USB cable and delivers the audio as a pair of balanced XLR outputs ready for any sound system. It exists to solve a problem every presenter, worship tech, and playback operator knows too well: the hum, hiss, and flimsy headphone-jack adapters that plague the moment a computer meets a professional console. The USB-Pro replaces that fragile connection with a solid, hum-free, pro-grade feed, so a laptop full of backing tracks or presentation audio sounds as good as anything else on the stage.

Why a Headphone Jack Is Not Enough

A laptop's built-in headphone output is unbalanced, low in level, and shares its ground with the computer's noisy power supply, so the moment you patch it into a mixing console you invite hum, buzz, and digital hash into the PA. Its converters are also built to a consumer price point, not a stage. The USB-Pro bypasses the computer's analog output entirely, pulling the audio out of the USB port as pure digital data and running its own high-grade converters and balanced output stage. That means the signal never touches the laptop's compromised analog circuitry, and what reaches the console is a clean, robust, professional feed.

24-Bit/96kHz Conversion With No Drivers to Install

Inside the USB-Pro, 24-bit digital-to-analog converters running at up to 96 kHz turn the computer's audio into analog with more than 90 dB of dynamic range and just 0.01 percent distortion, so quiet passages stay quiet and full-range music arrives intact. Because it is class-compliant, there are no proprietary drivers to load: plug it in and it appears automatically as an available sound card in Windows and macOS, auto-sensing 44.1, 48, or 96 kHz to match your files. For an operator walking into an unfamiliar venue, that plug-and-play behavior means one less thing that can fail before the room fills.

Balanced Outputs, Level Control, and Ground Isolation

A stereo pair of balanced XLR outputs lets the USB-Pro drive a mic preamp, mixing console, PA system, or powered speaker directly, with the balanced connection rejecting noise picked up along the cable run. A front-panel level control sets the output volume without touching the computer, and if a ground loop still creeps in, switchable isolation transformers and ground-lift switches drop into the signal path to eliminate hum and buzz. A mono-sum switch collapses the stereo feed to mono when the system needs it. The result is a connection you can trust in any room, with the tools to solve noise on the spot.

Built-In Headphone Monitoring

A dedicated 3.5mm headphone output with the USB-Pro's own level control turns the box into an instant listening station. Before a track ever reaches the PA, the operator can plug in and confirm the right file is playing, at the right level, on the correct channels, catching a mistake in headphones rather than in front of an audience. In the studio, the same output makes it easy to verify a client's files as they transfer at full sample rate. It is a small feature that quietly prevents the most embarrassing playback failures.

Who the USB-Pro Is For

The USB-Pro is for the presenter and AV tech who need laptop audio to reach the room cleanly and reliably; for the house-of-worship and theater operator running backing tracks and click into a console; for the DJ and event playback operator who wants a rugged, balanced connection instead of a consumer adapter; and for the system engineer auditioning high-resolution reference files through a PA. Bus powered off the USB port and wrapped in 14-gauge steel, it is the simplest way to make a computer a first-class citizen on a professional sound system.