Radial Engineering Reamp Station Combination Active Direct Box and Reamp JCR-1

Radial Reamp Station Combined Studio DI and Reamp Box

Radial Engineering StageBug SB-2 1-channel Passive Instrument Direct Box-1

Radial Engineering StageBug SB-2 Compact Passive Instrument Direct Box

Radial StageBug SB-1 Active 48V Phantom-Powered DI Direct Box

Home DI Boxes / Transformers Radial StageBug SB-1 Active 48V Phantom-Powered DI Direct Box
was $140.00 Special Price $109.99

Compact Active 48V Phantom-Powered DI, Low-Profile StageBug Form, 1/4" Instrument Input, 1/4" Thru, Balanced 330 Ω XLR Output, Input Pad, 180° Polarity, Ground Lift, No Batteries, 16-Gauge Steel Guitar-Case-Friendly Chassis

Availability: On Backorder – More Expected Soon
SKU
SB-1 Active

 

 

Radial products purchased by an authorized Radial Engineering reseller include a 3 year, transferable warranty.

Radial SB-1 Features:

  • COMPACT ACTIVE DI - A powered buffer converts a high-impedance pickup to a clean, low-impedance balanced signal in a box small enough for a guitar case.
  • HIGH 800 KILOHM INPUT - The active front end preserves the full detail of an acoustic piezo or passive bass pickup that a transformer can load down.
  • 48V PHANTOM POWERED - Draws just 5 milliamps from the mixer's phantom power, with no batteries to check, change, or fail mid-show.
  • 1/4-INCH THRU JACK - Passes the signal to your onstage amp while the XLR feeds the house, so you hear yourself and the audience hears the PA.
  • PAD, POLARITY, AND GROUND LIFT - Tames hot preamps, flips phase to lock in with a mic, and breaks hum-causing ground loops to the console.
  • PROFESSIONAL PERFORMANCE - 20 Hz to 20 kHz response, more than 100 dB of dynamic range, and under 0.006% THD keep your tone true.
  • 16-GAUGE STEEL CHASSIS - A rugged low-profile shell survives travel and slips into a gig-bag pocket for fly dates and rented backlines.

Radial SB-1: A Case-Friendly Active DI That Travels Anywhere

The Radial SB-1 is a compact, active phantom-powered direct box (DI) built in the low-profile StageBug form, small enough to live in a guitar case yet ready to turn an acoustic-electric guitar or passive bass into a clean, balanced signal for the PA. Its active buffer converts a high-impedance instrument pickup to a low-impedance balanced XLR output, running entirely on 48-volt phantom power with no batteries to fail mid-set. For the player who wants a professional-grade DI that disappears into a gig bag and is always there when the house engineer asks for a direct feed, the SB-1 is the travel DI worth carrying.

What an Active DI Does

A direct box takes the high-impedance, unbalanced signal from an instrument pickup and converts it into a low-impedance, balanced signal a mixing console can accept over a long cable run. That conversion does three things at once: it keeps the tone full instead of thin, it lets the signal travel a long distance without picking up noise, and it hands the console a clean feed at the right level. An active DI, like the SB-1, does this with a powered buffer rather than a transformer, which is what makes it so kind to delicate low-output pickups.

Active Buffer: Why the SB-1 Runs on Phantom Alone

The heart of the SB-1 is an active buffer that presents a very high input impedance to your instrument, up to 800 kilohms, so an acoustic guitar's piezo or a passive bass pickup delivers its full detail instead of being loaded down and dulled. That buffer needs power, and the SB-1 draws it entirely from the 48-volt phantom power your mixer already supplies, sipping just 5 milliamps. There are no batteries to check, change, or die during a show. Plug in an XLR, switch phantom on at the board, and the SB-1 is running.

The Numbers That Matter

For a box this small, the measured performance is genuinely professional. The SB-1 covers the full audible range from 20 Hz to 20 kHz, delivers more than 100 dB of dynamic range, and holds total harmonic distortion below 0.006%, figures that mean your acoustic guitar or bass reaches the PA sounding exactly like itself. The balanced XLR output sits at 330 ohms, an ideal match for any console mic input, so long cable runs to a distant stage box stay quiet and clean all the way from the stage to front of house.

Pad, Polarity, Ground Lift, and the Thru Jack

Despite its size, the SB-1 carries the controls that matter on a real stage. An input pad tames a hot active preamp so nothing overloads the buffer. A 180-degree polarity switch flips phase to lock in with a mic or a second DI. A ground-lift switch breaks the hum-causing loop between your rig and the console. And a 1/4-inch Thru jack passes the signal straight through to your onstage amp while the XLR feeds the house, so you hear yourself on stage and the audience hears you through the PA, all from a single instrument.

Small Enough to Fly

The SB-1 measures just 4.5 by 1.85 by 1.35 inches and weighs only 0.55 pounds, wrapped in a 16-gauge steel shell that shrugs off the abuse of travel. That low-profile footprint is the whole point of the StageBug line: it slips into the accessory pocket of a guitar case or the corner of a gig bag and is simply always with you. For fly dates and rented backlines where every ounce of luggage counts, having a professional DI that takes up no meaningful space is a genuine advantage.

Who the Radial SB-1 Is For

The SB-1 is for the singer-songwriter plugging an acoustic-electric into the PA at a coffeehouse or festival stage; for the bassist who needs a clean direct feed from a passive instrument; and for the touring player packing light who wants a professional DI that lives permanently in the case. If you want the quiet, detailed sound of an active direct box in a box small enough to forget you are carrying, the SB-1 is the travel-ready DI to keep in every gig bag.

More Information
MPN R800 0110
Color Red
Input 1/4"
Power Source 48V Phantom Power
Form Direct Box
Output XLR
Channels Mono
UPC / EAN 676101040643
Brand Radial Engineering
Product Condition New
Availability In Stock

Radial SB-1 Specifications

TypeActive phantom-powered direct box (DI)
Input Impedance800 kilohm (23 kilohm on Thru)
Inputs1/4-inch instrument + 1/4-inch Thru
OutputBalanced XLR, 330 ohm
Frequency Response20 Hz - 20 kHz
Dynamic RangeMore than 100 dB
THDLess than 0.006%
Power48V phantom (5 mA, no batteries)
ControlsInput pad, 180-degree polarity, ground lift
Chassis16-gauge steel