Radial Power-1 Rackmount Power Conditioner & Surge Suppressor with USB Charging

Radial Power-1: Clean, Protected Power for Your Entire Rack

The Radial Power-1 is a single-rackspace power conditioner and surge suppressor, a 1U steel unit that stands between the wall and every valuable piece of gear in your rack. It combines a premium metal-oxide varistor (MOV) surge circuit, a high-rejection RF interference filter, and eleven total AC outlets with a front-panel USB charging port, delivering clean, stable power to consoles, amplifiers, interfaces, and recording gear alike. One power spike can silence a session or a show in an instant, and the Power-1 is the quiet insurance that keeps that from ever happening to you.

What a Power Conditioner Actually Does for Your Signal

Wall power is never as clean as it looks: it carries voltage surges, radio-frequency noise, and ground contamination that creep into your audio as hum, buzz, and the occasional destructive spike. A power conditioner sits at the front of your power path and scrubs those problems out before they reach your gear, clamping dangerous surges, filtering high-frequency interference, and distributing conditioned power to every device downstream. The Power-1 handles all three jobs in one rugged rackmount box, so your rig sounds cleaner and survives longer.

Premium MOV Surge Protection That Lasts

At the heart of the Power-1 is a premium metal-oxide varistor, the component that absorbs and clamps incoming voltage surges before they can reach your equipment. Unlike the low-grade MOVs found in typical consumer power strips, Radial's premium part offers superior thermal protection and a dramatically longer service life, so its protection does not degrade after the first few hits. A 15-amp circuit breaker backs it up, cutting power instantly if the load exceeds safe limits. Together they give you protection you can trust night after night, not just on day one.

RF Filtering and a Non-Ground-Contaminating Design

The Power-1 runs incoming AC through a high-rejection RF interference filter that keeps high-frequency hash and AM radio signals out of the power line, preventing that noise from contaminating your audio. Just as important, it employs shunt-mode surge technology and a non-ground-contaminating design, diverting surges without dumping noise onto the ground path that ties your whole system together. The result is a lower system noise floor across every connected device, the kind of quiet background that lets soft passages breathe.

Eleven Outlets, Wall-Wart Spacing, and USB Charging

Power distribution is where the Power-1 earns its rack space. Eight outlets sit on the rear panel, four of them widely spaced to accommodate bulky wall-wart power supplies without blocking their neighbors, and three more outlets live on the front panel for gear you plug and unplug often. A front-panel USB charging port rated 5V, 1A tops off a phone or tablet without hunting for a spare adapter. A heavy-duty power switch and a 9.5-foot power cord round out a layout built for real-world racks.

Built Radial Tough for the Studio and the Road

Housed in a rugged steel chassis with reinforced outlet connectors, the Power-1 is engineered to survive the vibration, heat, and repeated load-in of touring life. It suits musicians, front-of-house engineers, producers, studio owners, and commercial AV installers, anyone with gear worth protecting. Bolt it into the top of a rack, patch your devices through it once, and let it quietly guard your investment show after show, session after session.