Free Shipping on Orders Over $59
|
Pioneer DJ HC-CA0402 Straight Headphone Cable for HRM-7 HRM-6 HRM-5 9.8 ft
was
$34.00
Special Price
$28.00
Straight Replacement Cable for Pioneer DJ HRM-7, HRM-6, and HRM-5 Headphones, 9.8-Foot (3 m) Length, Proprietary 2.5mm Stereo TRS Mini-Jack, 3.5mm Right-Angle TRS Source Plug, Gold-Plated Contacts, Durable Strain-Relief Plugs, Tangle-Resistant Straight Design, Black
Availability:
Special Order, Please Allow 2-4 Weeks For Delivery
SKU
HC-CA0402
Pioneer DJ HC-CA0402 Features:
- FACTORY-MATCHED FOR THE HRM SERIES - a direct replacement cable for the Pioneer DJ HRM-7, HRM-6, and HRM-5 studio monitor headphones
- 9.8-FOOT STRAIGHT LENGTH - 3 meters of tangle-resistant reach for moving around a console, interface, and outboard gear
- PROPRIETARY 2.5MM TRS MINI-JACK - seats securely into the HRM earcup for a locked-in headphone-side connection
- 3.5MM RIGHT-ANGLE SOURCE PLUG - a low-profile 1/8-inch TRS connector that stays clear of your gear and pocket
- GOLD-PLATED CONTACTS - corrosion-resistant plating keeps the signal clean and the connection stable over time
- DURABLE STRAIN-RELIEF PLUGS - firm, secure ends limit vibration and signal loss so your monitoring stays continuous (cable only)
Pioneer DJ HC-CA0402: A Full-Length Replacement Cable That Gets Your HRM Headphones Back to Work
The Pioneer DJ HC-CA0402 is a 9.8-foot (3-meter) straight replacement cable for the HRM-7, HRM-6, and HRM-5 professional studio monitor headphones. When a favorite pair of reference headphones falls silent because of a worn, crackling cord, this factory-matched cable restores clean, full-range sound without the cost of replacing the whole headphone, so a mix you trust is only a plug-in away.
Gold-Plated 2.5mm and 3.5mm Connectors Built for a Tight, Quiet Signal
The HC-CA0402 terminates in a proprietary 2.5-millimeter stereo TRS mini-jack that seats into the HRM earcup and a 3.5-millimeter (1/8-inch) stereo TRS right-angle plug at the source end, both with gold-plated contacts that resist corrosion for a stable connection over time. The durable molded plugs grip firmly to limit the micro-vibrations and intermittent dropouts that develop as an old cord loosens, so the signal reaching your ears stays continuous and full. Because the cable detaches at the earcup, replacing a damaged cord is a ten-second job rather than a repair.
9.8 Feet of Straight Reach for the Studio and the Desk
At 9.8 feet, this straight cable gives you room to move between a monitor controller, an audio interface, and an outboard rack without unplugging, and it lies flat and tangle-resistant compared with a coiled cord. The extra length suits a seated engineer who needs to reach across a large console or a producer who steps back from the desk to listen at a distance, making it the long-run companion to the shorter 3.9-foot HC-CA0403 in the same family.
Who the HC-CA0402 Is For
Studio engineers, producers, and podcasters who mix and monitor on the HRM-7, HRM-6, or HRM-5 reach for the HC-CA0402 to keep a proven pair of headphones in service and to carry a spare in the bag for the moment a cord finally gives out. If your reference headphones have gone quiet or crackly, this is the exact factory-length cable that brings them back. This listing is for the cable only; the headphones are sold separately.
| MPN | HC-CA0402 |
|---|---|
| Color | Black |
| Form | Cable |
| UPC / EAN | 841300100355 |
| Brand | Pioneer DJ |
| Product Condition | New |
| Availability | Out of Stock |
Pioneer DJ HC-CA0402 Specifications
| Fits | Pioneer DJ HRM-7, HRM-6, and HRM-5 studio monitor headphones |
| Type | Straight replacement headphone cable |
| Cable Length | 9.8 ft (3 m) |
| Connector (Headphone) | Proprietary 2.5 mm stereo TRS mini-jack |
| Connector (Source) | 3.5 mm (1/8 in) stereo TRS, right-angle |
| Contacts | Gold-plated |
| Structure | Detachable at the earcup |
| In the Box | Cable only (headphones not included) |