Pioneer DJ DJM-V10-LF 6-Channel Professional DJ Mixer with 60mm Long Faders

Pioneer DJ DJM-V10-LF: The 6-Channel Flagship Built for Long-Fader Mixing

The DJM-V10-LF takes the acclaimed creative-style DJM-V10 platform and rebuilds it around one decision: how you want to move volume. Pioneer DJ removed the crossfader and replaced the channel's 45mm faders with brand-new 60mm shaft slide faders, giving you 33% more travel on every channel. For DJs who blend, layer, and ride levels rather than scratch, that extra length is the difference between a coarse jump and a surgical fade. This is the same flagship 6-channel professional DJ mixer reviewers call the best-sounding in its class — now tuned for the fader-mixing player who lives in the long throw.

Why 60mm Faders Change How You Mix

A longer fader is not a cosmetic upgrade — it is more physical resolution. Across 60mm of travel you can hold a vocal at the exact level under an incoming track, ease a bassline in over four bars, or pull a channel back a hair without overshooting. The DJM-V10-LF ships with two classic DJM-V10 fader curves re-optimized for the extra length, plus an all-new custom curve preset designed specifically for fine channel-volume control. Whether you mix house, techno, or open-format, the long throw turns volume into an instrument you actually play, not a switch you flip.

Six Channels, Each One a Complete Creative Tool

Every one of the DJM-V10-LF's 6 channels is fully loaded: a newly developed 4-band EQ (Hi, Hi-Mid, Lo-Mid, Lo), a dedicated high-pass/low-pass filter with resonance, a per-channel compressor to control loudness and add punch, and a dedicated FX send. Six full channels means you can run multiple CDJs, a pair of turntables, a laptop, and an external sampler at once — and shape each source independently. The 3-band master isolator sits over the top with adjustable crossover frequencies and new boost/cut curves, so you can carve the whole mix in real time and drive a room with a single dial.

Elite Sound Quality: 64-Bit DSP and 32-Bit Converters

The DJM-V10-LF is built to be heard. Studio-quality 64-bit mixing and dithering processing runs inside the DSP, fed by 32-bit high-quality A/D and D/A converters and a low-jitter clock circuit. The result is a full, weighty low-end, vibrant mids, and precise highs that hold together at club volume. The frequency range spans 20 Hz to 40 kHz with a 105 dB line signal-to-noise ratio. For producers, the built-in USB sound card carries up to 6 stereo channels at 32-bit/96 kHz, so you can multitrack a set straight into your DAW.

Effects, Monitoring, and Connectivity Built for the Booth

An expanded send/return section lets you patch in outboard effects and combine them with the onboard touchscreen Beat FX, which includes Hi/Mid/Low frequency cuts for targeted manipulation. Two independent headphone outputs make back-to-back sets comfortable, and a dedicated booth output with Booth EQ keeps your monitor mix separate from the house. Connectivity is flagship-grade: 4 phono/line and 6 line inputs, 6 S/PDIF digital inputs, an AES/EBU digital output, two top-mounted USB-B ports plus an iOS USB port for the RMX-1000, and DIN MIDI out. A lockable power cable keeps the unit live through the hardest sets.

DVS, ShowKontrol, and Streaming for the Modern DJ

The DJM-V10-LF is rekordbox DVS, Serato DVS-ready, and TRAKTOR DVS-ready, so you can control digital files with CDJs or turntables in your software of choice. Pro DJ Link networking ties your decks together, and the extended ShowKontrol protocol streams real fader and knob positions out to lighting and visual rigs — letting LJs and VJs lock the show to your hands. DJM-REC compatibility means you can record and live stream straight to Twitch, YouTube, and Mixcloud Live. Whether you are a touring resident upgrading from a standard DJM-V10, an open-format DJ who wants finer control, or a producer building a permanent studio booth, the long-fader flagship is the mixer you grow into, not out of.