All-Aluminum Tubular Construction, Pair of Tripod-Style Speaker Stands, 120 lb Load Capacity Per Stand, Height Adjusts 45 in to 74.75 in, 8 Preset Height Holes with Steel Locking Pin, 1.375 in Upper Shaft with 1.5 in Adapter Included, 32–48 in Wide Tripod Base, Nonslip Rubber Feet, Fold-Flat Tripod Legs, Drawstring Carry Bag with Center Divider and Adjustable Shoulder Strap, 19 lb Total Pack Weight, Black Finish
The SSP7900 is the speaker stand pair that closes the gap between a flimsy single stand and an expensive crank-up tripod. Two all-aluminum tripod-style stands ship together in a heavy-duty nylon drawstring bag with an interior center divider that separates the stands inside the bag and an adjustable shoulder strap that turns the carry into one trip from the vehicle to the venue. The total pack weight is 19 lb — light enough for a single operator to handle, sturdy enough to hold a 120 lb powered cabinet on each stand. This is the pack working PA techs reach for when they need stands they can deploy and strike fast at every gig.
Each stand is rated to support up to 120 lb — well above the weight of the most common 12-inch and 15-inch active cabinets on the market. The all-aluminum tubular construction (legs, center shaft, and cross-bracing all aluminum) keeps each stand lightweight without sacrificing structural margin. The wide-stance tripod base expands from 32 in to 48 in to spread the load across a large footprint, and the nonslip rubber feet stop the legs from skidding on hardwood, polished concrete, ballroom carpet, or outdoor grass. The result: a stand pair that holds RCF ART 9 Series, JBL EON, QSC K Series, and Yamaha DBR mains at lifted front-of-house height without flexing, creaking, or shifting under load.
Eight preset height holes per stand let the engineer adjust from a 45-inch monitor-wedge setting up to a 74.75-inch front-of-house height — covering ceremony, reception, sermon-time, conference, and small-club deployments from one pack. Crucially, the height is reinforced with a steel locking pin at each preset rather than relying on clutch friction alone. The load rests on the pin; the clutch knob is secondary. That detail matters when a heavy powered cabinet has been on the stand for the third hour of a six-hour reception — the pin doesn't loosen, slip, or fatigue under sustained load.
The upper shaft is 1.375 in (35 mm) diameter and a 1.5 in (38 mm) adapter sleeve ships pre-installed with the pack. Between those two diameters, the SSP7900 fits every standard speaker cabinet pole-mount socket on the market — no separate adapter to source, no surprise mismatch at load-in. The adapter slides on and off the shaft in seconds for cabinets that need the smaller diameter, and the conversion is reversible at any gig.
The included drawstring bag is heavy-duty nylon, sized to hold both folded stands with an internal divider that prevents the metalwork from scratching itself in transit. An adjustable shoulder strap and drawstring closure make the bag practical for stairs, parking lots, and load-in routes that involve more than one set of doors. The bag is the difference between hauling two loose stands and one organized pack — and it's the reason the SSP7900 turns up so often on rental fleets and church A/V inventories.
First-time mobile DJs and wedding sound techs choose the SSP7900 because it ships ready — two stands and a bag for one order, no separate adapter to remember. Upgraders coming from cheaper plastic-joint stands move up to the locking-pin support and the all-aluminum construction once they have a heavier powered cabinet on top. Comparison shoppers running rental fleets value the 19 lb total pack weight, the 120 lb load rating per stand, and the carry bag with center divider — the math on this pack lines up with the way pros actually transport, deploy, and strike PA stands at real gigs. One pack. Two stands. One bag. Order yours.
| MPN | SSP7900 |
|---|---|
| Color | Black |
| UPC / EAN | 659814100330 |
| Brand | On-Stage Stands |
| Product Condition | New |
| Availability | In Stock |
| Type | Tripod-Style Speaker Stand Pack (Pair) |
| Quantity | 2 Stands + 1 Carry Bag |
| Load Capacity | 120 lb (54 kg) per Stand |
| Height Range | 45 in to 74.75 in (114 cm to 190 cm) |
| Height Presets | 8 Preset Holes with Steel Locking Pin |
| Construction | All-Aluminum (Tubular Legs and Shaft) |
| Upper Shaft Diameter | 1.375 in (35 mm) with 1.5 in (38 mm) Adapter Included |
| Base Diameter | 32 in to 48 in |
| Feet | Nonslip Rubber |
| Folding | Tripod Bases Fold Flat for Transport |
| Carry Bag | Heavy-Duty Nylon Drawstring with Interior Center Divider and Adjustable Shoulder Strap |
| Total Pack Weight | 19 lb |
| Color | Black |
| In the Box | 2x All-Aluminum Speaker Stand | Drawstring Carry Bag with Center Divider and Shoulder Strap | 1.5 in Adapter Sleeve per Stand |