Neumann TLM 102 Studio Set Cardioid Condenser Microphone with EA 4 Mount

Neumann TLM 102 Studio Set: Mic and Shockmount in Nickel

The Neumann TLM 102 Studio Set is a compact large-diaphragm cardioid condenser microphone packaged with the matching EA 4 elastic shockmount in Neumann's classic nickel finish. The microphone is the standard TLM 102, built around a purpose-designed large-diaphragm capsule, the transformerless TLM output stage and a fixed cardioid pattern in a slim 116 mm body. The defining feature of the Studio Set is what comes with it: the EA 4 suspension replaces the simple swivel mount and isolates the capsule from vibration. It runs on 48 V phantom power through a balanced XLR, dropping into any interface or console. For an engineer who wants the mic and its proper mount together in the traditional nickel look, this is the complete package.

Neumann TLM 102 Studio Set: The EA 4 Shockmount

The EA 4 elastic shockmount is the heart of the Studio Set and the reason to choose it over the mic alone. Instead of clamping the microphone rigidly to a stand, the EA 4 cradles it in elastic suspension that absorbs footfalls, desk bumps and stand rumble before they reach the capsule. On quiet vocal and voiceover takes that isolation keeps low-frequency thumps out of an otherwise pristine recording. Here the mount and microphone both wear the classic nickel finish, giving the rig the traditional Neumann studio look rather than the blacked-out BK version. Buying the Set pairs mic and suspension from the outset.

Neumann TLM 102 Studio Set: The Large-Diaphragm Capsule

The nickel TLM 102 carries the same large-diaphragm cardioid capsule as every version, delivering clear, focused sound with authoritative Neumann midrange. A gentle presence lift around 10 kHz adds silky highs to vocals and voiceover while the midrange stays linear and true. The large diaphragm gives a warm, controlled low end that builds as a singer moves closer. Fast transient response keeps guitars and drums sharp and defined. The finish is different from the BK, but the voicing is pure TLM 102.

Neumann TLM 102 Studio Set: Noise Guarded Both Ways

The transformerless output stage delivers a direct, uncolored signal with a low end that stays powerful at high levels. It lets the microphone handle sound pressure up to 144 dB without distortion, so loud amps and drums record as cleanly as soft vocals. Self-noise of just 12 dB-A sits below the ambient level of a quiet room, keeping intimate passages hiss-free. The EA 4 guards the same quiet recordings against mechanical vibration. Together the electronics and suspension defend the signal from noise on both fronts.

Neumann TLM 102 Studio Set: A Ready-to-Run Vocal Rig

The Studio Set is aimed at vocal and voiceover recording, where the EA 4 suspension proves its worth on close, quiet takes. The mic then handles guitar, bass, drums, percussion and brass with the same ease as any TLM 102. Its nickel finish suits a traditional studio look on a visible stand or boom. Podcasters and home-studio owners get a shock-isolated, broadcast-clear vocal rig in a single box. It is a versatile, ready-to-run package that sounds professional from the first take.

Neumann TLM 102 Studio Set: In the Box

The TLM 102 Studio Set ships as the nickel TLM 102 microphone with the matching EA 4 elastic shockmount, ready to mount on a stand or boom. It draws standard 48 V phantom power and connects over a balanced XLR to any interface, mixer or preamp. This bundle suits the vocalist, podcaster or project engineer who wants the classic nickel Neumann look with its suspension included. Choosing the Set means the mic and mount are matched from day one. Designed and built in Germany, it is made for decades of daily use.