Broadcast Microphone, Dynamic Moving-Coil Capsule, Hypercardioid Pattern, Classic FM Announcer Voice, Integrated Pop Screen and Dual Suspension, No Phantom Power Required, Handles High SPL, XLR Output, Nickel Finish
This original Neumann product is covered by a warranty of 24 months. The warranty period begins on the date of purchase of brand new, unused products by the first end user.
The Neumann BCM 705 is a hypercardioid dynamic broadcast and podcast microphone voiced for the classic American announcer sound. Where its condenser sibling the BCM 104 captures air and detail, the BCM 705 uses a rugged dynamic moving-coil capsule for the smooth, authoritative tone long associated with private FM radio. That dynamic element is inherently tough and forgiving, shrugging off close, loud delivery that would tax a sensitive condenser. It needs no phantom power, connecting over a standard XLR straight into a mic input. The result is a voice that carries clear, broadcast-ready authority through the speakers.
At the core of the BCM 705 is a dynamic moving-coil transducer chosen for its warmth, robustness, and resistance to plosives and moisture. Dynamic capsules are the traditional workhorses of broadcast because they stay reliable under heavy daily use and never sound brittle. This one is tuned to render a spoken voice with body and smoothness rather than clinical detail, which is exactly the character FM radio built its identity on. With an output of 1.7 mV/Pa into a 200-ohm load, it behaves like the professional dynamic mics engineers already know. It is the classic radio sound in a modern Neumann build.
The hypercardioid pattern is tighter than a standard cardioid, so the BCM 705 keeps extraneous noise and spill off the air even when a studio's sound-proofing is less than ideal. For local stations, home studios, and podcast rooms without acoustic treatment, that focused pickup is a genuine advantage. It concentrates on the presenter directly in front while rejecting sound arriving from the sides and rear. The tighter pattern also tames room reflections that would otherwise wash out a spoken voice. In a live-to-air setting, it keeps the signal clean without demanding a perfect room.
The frequency response is tailored to the human voice across the full 20 Hz to 20 kHz range. A gentle presence boost above 2 kHz lifts intelligibility so consonants cut through, while a soft bass roll-off keeps the low end full without turning boomy. Working close, an announcer gets the warm proximity effect that gives radio voices their weight and command. The voicing is deliberately smooth, flattering speech without the edge that can make long shifts fatiguing to listen to. It is a tuning aimed squarely at hours of comfortable, commanding delivery.
Rumble is handled twice over in the BCM 705. An external elastic mount isolates the whole body from desk vibration and boom-arm movement, catching the coarse mechanical noise first. A newly designed internal capsule suspension then adds a second stage of protection right at the transducer. Together the two stages keep footfalls, keyboard taps, and desk knocks from reaching the signal. For a busy studio where the mic gets handled constantly, that layered isolation is what keeps the air clean.
An internal foam screen stops plosives and also shields the capsule from moisture, dirt, and the nicotine and dust of a working studio. Because the protection is built in, there is no external pop filter interrupting the on-air look. The headgrille twists off for quick, hygienic cleaning between hosts or shifts. That serviceability keeps the microphone dependable through years of shared, heavy use. It is maintenance designed for the realities of a broadcast environment, not a quiet studio.
Because it is a dynamic microphone, the BCM 705 requires no phantom power, so a presenter simply patches into a mic input and goes live. There is none of the setup fuss or 48 V dependency a condenser can demand, which makes it refreshingly foolproof in a busy control room. The rugged capsule also tolerates high-SPL sources, so it can step out of the booth to handle brass or guitar cabinets when needed. Its functionally shaped body is designed to ride on standard broadcast boom arms. Simplicity and durability are as much a part of the design as the sound.
Radio announcing and local stations are the BCM 705's natural home, where it delivers broadcast authority without a perfect room. On a podcast or streaming boom it gives independent creators the smooth, FM-style voice listeners associate with professional radio. Untreated rooms benefit most from its tight pattern and forgiving dynamic capsule. When a project calls for it, the mic also handles high-SPL instruments like brass and cabinets. For anyone who wants classic radio sound in a rugged, plug-and-play package, it is the dynamic counterpart to Neumann's broadcast condensers.
| MPN | 008507 |
|---|---|
| Color | Nickel |
| Element | Dynamic |
| Pattern | Hypercardioid |
| Form | Broadcast Microphone |
| Output | XLR |
| UPC / EAN | 615104085077 |
| Brand | Neumann |
| Product Condition | New |
| Availability | In Stock |
| Microphone Type | Broadcast Dynamic |
| Transducer | Dynamic (Moving Coil) |
| Directional Pattern | Hypercardioid |
| Frequency Range | 20 Hz – 20 kHz |
| Sensitivity | 1.7 mV/Pa (–55.4 dB) |
| Equivalent Noise Level (A-weighted) | 18 dB-A |
| Signal-to-Noise Ratio (A-weighted) | 76 dB |
| Rated Impedance | 200 ohms |
| Powering | No Phantom Power Required (Passive) |
| Connector | XLR 3-Pin (M) |
| Integrated Hardware | Elastic Suspension, Internal Capsule Suspension, Foam Pop Screen, Removable Headgrille |