Lewitt LCT 50 Cxx Mil-Spec Transport Case for LCT 840 / 940, Black

Lewitt LCT 50 Cxx: Mil-Spec Protection Sized for the Larger LCT 840 and 940

The Lewitt LCT 50 Cxx is a mil-spec hard transport case cut specifically for Lewitt's larger-bodied premium condensers — the LCT 840 tube microphone and the LCT 940 tube-and-FET microphone. These are big, heavy, high-value capsules, and the Cxx gives them a one-piece molded shell that is waterproof, dustproof, and impact-resistant, with custom foam sized to their taller bodies plus the pressure valve and padlockable latches that serious travel demands. It is the case that lets you move a flagship tube microphone with complete confidence.

Why the Bigger Bodies Need Their Own Case

The LCT 840 and LCT 940 are not the same size as Lewitt's standard LCT condensers — their tube circuitry gives them a longer, heavier body that will not seat correctly in a case cut for the smaller LCT 540 S or 640 TS. The Cxx exists to solve exactly that: its foam is shaped to the outline of the 840 and 940 so the microphone sits fully cradled and immobile, with no gaps that let it shift and no compression that fights the lid. Getting the foam fit right is what makes a case protective — a microphone that cannot move cannot be jarred against a hard surface — and using the case matched to your body size is what guarantees that fit.

Built to Survive the Road: Seal, Valve, and Lock

The Cxx carries the full mil-spec feature set into a larger footprint. Its one-piece molded shell has no seams to split, and a rubber gasket around the lid forms a waterproof, dustproof seal when the interlocking latches close. An automatic pressure-equalization valve vents the pressure swings of air travel so the case never vacuum-locks shut, while keeping water and dust out, and an integrated locking point accepts a padlock (not included) to secure the microphone for checked baggage, shared facilities, or storage. Reinforced corners and edges absorb the impacts of real-world transit before they ever reach the capsule inside.

Who the Lewitt LCT 50 Cxx Is For

The LCT 50 Cxx is for the owner of an LCT 840 or LCT 940 who needs to transport or store a flagship tube microphone safely — the mastering-grade home studio, the touring or freelance engineer, or the facility that has to protect a high-value capsule against drops, water, and dust. Choose the Cxx specifically when your microphone is one of the larger 840 or 940 bodies; the smaller LCT 50 Cx is cut for the LCT 540 S and 640 TS, while this case is the one shaped to fit yours. If you own an 840 or 940, this is the armor built around it.