4K/18G Commercial-Grade HDMI Cable, 20 Feet, HDR10, HDCP 2.2, Ethernet Channel, Audio Return Channel, CL3 and FT4 Fire-Rated, Dolby Atmos and DTS-HD Support
The Key Digital KD-Pro20 is a commercial-grade 4K/18G HDMI cable measuring 20 feet (6.1 m) between its HDMI Type A male ends. The extra length over a shorter patch cord gives an integrator the slack needed to reach from a floor rack or credenza up to a ceiling projector or a display across the room. Commercial-grade construction with heavier shielding lets it hold full bandwidth across that longer fixed run without the sparkle or dropout a consumer cable can show at distance. It is built to serve as a permanent HDMI backbone that stays clean through years of daily switching.
Rated at 18 Gbps, the KD-Pro20 supports Ultra HD/4K resolutions up to 4096x2160 and 3840x2160 at 60Hz with 4:4:4 chroma subsampling. The 18 Gbps figure is the full throughput a modern HDMI 2.0 signal can demand, and 4:4:4 chroma keeps every pixel's color sample intact instead of averaging color across neighbors. Delivering that complete pipe over 20 feet means fine text, CAD graphics, and fast on-screen motion reach the display at full color resolution rather than being compressed to fit a narrower link. The longer run therefore looks identical to a short one at the display.
HDR10 high dynamic range and HDCP 2.2 copy protection both pass through the KD-Pro20 without degradation. HDR10 expands the luminance range an image can express for brighter highlights and deeper, more detailed shadows, and HDCP 2.2 is the handshake modern 4K sources require before releasing protected content. Passing both reliably over the 20-foot run keeps protected movies, streaming apps, and secured presentation content free of handshake dropouts. Backward compatibility with earlier HDCP revisions means the same cable also supports older sources on the link.
Audio formats up to Dolby 7.1, Dolby Atmos, and DTS-HD travel with the video on the KD-Pro20. These multichannel and object-based formats position sound around and above the audience, and carrying them intact preserves the full theater or presentation soundstage the source produces. The Audio Return Channel routes a display's own audio back to a receiver or soundbar over the same cable, so a smart display's built-in apps can feed the room's sound system. That eliminates a separate return cable and tidies the connections behind the equipment.
CL3 and FT4 fire-code ratings qualify the KD-Pro20 for in-wall routing wherever local code demands a rated jacket. Those ratings verify the jacket resists flame spread inside a wall cavity, the condition for legally concealing AV cable in commercial construction. Key Digital's OPEN EYE testing certifies each cable for low loss and noise-free performance across its full 20-foot length, and a 100 Mb/s Ethernet channel is available between HDMI-enabled endpoints. An installer can therefore bury the run in the wall and rely on it to carry a pristine 4K HDR signal.
A 20-foot reach fits longer credenza-to-projector and rack-to-display pulls that a shorter cable cannot span. Boardrooms, lecture halls, sanctuaries, and home theaters use this length to reach a ceiling-mounted projector or a far-wall display from a centralized source location. Because it is fully rated and carries the complete 18 Gbps pipe, the cable removes the guesswork of whether a longer HDMI run will hold 4K HDR. That predictability makes it a default specification for permanent 4K links that need a little extra distance.
| MPN | KD-Pro20 |
|---|---|
| Color | Black |
| Input | HDMI |
| Power Source | Passive |
| Form | HDMI Cable |
| Output | HDMI |
| UPC / EAN | 815996020310 |
| Brand | Key Digital |
| Product Condition | New |
| Availability | In Stock |
| Cable Length | 20 ft (6.1 m) |
| Bandwidth | 18 Gbps |
| Max Resolution | 4096x2160 / 3840x2160 at 60Hz 4:4:4 |
| HDR | HDR10 |
| HDCP | HDCP 2.2 (backward compatible) |
| Audio Formats | Dolby 7.1, Dolby Atmos, DTS-HD |
| Audio Return Channel | Yes |
| Ethernet Channel | 100 Mb/s |
| Fire Rating | CL3 / FT4 |
| Connectors | HDMI Type A Male to Male |
| 3D | Supported |