Gator Frameworks GFW-MIC-0821 Deluxe Tripod Microphone Stand with Fixed 30-Inch Boom

Gator GFW-MIC-0821: The Working Boom Stand for Amps, Kick Drums, and Floor Vocals

The Gator Frameworks GFW-MIC-0821 is the floor-stand-plus-boom you reach for when the microphone needs to be somewhere a straight stand cannot put it — six inches off a guitar-amp grille, in front of a kick-drum head with the tripod legs clear of the bass-drum pedal, or out over an acoustic guitar without the stand crowding the player. Telescoping from 41 to 65 inches with a 30-inch fixed counterweight boom and a steel-threaded counterweight that holds the boom angle through a full set, it does the two hardest mic placements in live sound and project-studio tracking with one piece of gear.

Why the 30-Inch Fixed Boom Outperforms a Straight Stand for Amp and Kick Drum Work

A straight stand puts the microphone directly over the tripod legs, which means the legs land wherever the sound source is — under the kick pedal, in front of the guitar combo, against the singer monitor. The GFW-MIC-0821 fixed-length 30-inch boom puts the microphone 30 inches off the vertical shaft so the legs can sit safely behind or beside the source. Pair it with a dynamic mic on a guitar amp and the mic sits on-axis to the speaker cone with the tripod a foot back from the cab. Drop it in front of a kick drum, and the boom reaches into the beater zone while the legs sit between the rack and floor toms. The steel-threaded counterweight on the boom end balances heavier dynamics and large-diaphragm condensers, so the boom holds its position from soundcheck through the encore — no mid-set re-tightening.

41-Inch to 65-Inch Height Range — One Stand, Every Source on the Stage

The vertical shaft telescopes from 41 inches at the bottom to 65 inches at full extension via a single twist-clutch joint. That covers a kick drum mic position at the low end, a seated guitar amplifier or acoustic player in the middle, and a standing vocalist at full height. House techs and home-studio engineers can move the same stand between a drum kit at the start of a tracking day and a stand-up vocal session by the end of it without swapping hardware. The twist-clutch is one motion between songs — no thumbscrew to find in low stage light, no nut to spin through five turns.

Heavy-Duty Steel Build, Foldable Legs, and Integrated Cable Management

Heavy-duty steel tubing, an all-metal joint at every connection, and a powder-coated black finish put the GFW-MIC-0821 in the working-tool tier instead of the throwaway-accessory tier. The tripod legs fold flat for transport in a car seat, on a hand truck, or in a corner of a rehearsal-room closet. Integrated cable-management clips along the vertical shaft route the XLR or USB cable up the back of the stand, off the floor, and out of the talent path — a small detail that prevents one of the most common live-sound tripping hazards.

5/8-27 Thread with Included 3/8-Inch Adapter — Compatibility with Every Mount on the Market

The top of the GFW-MIC-0821 is a standard US 5/8-27 thread with a 3/8-inch Euro adapter included, so every mic clip, shockmount, fixed-pattern mount, and goose-mount in the catalog screws straight on. Pair it with a Rode PSA-style thread, an On-Stage shockmount, a Gator GFW-MIC-CLIP, or a Zoom M2 thread-mount on the standard 5/8-27 — no accessory shopping required to use the stand on day one.

Who This Stand Is For

For the gigging guitarist who is tired of dragging tripod legs into the kick drum every time the amp gets miked. For the project-studio engineer who needs one stand that covers vocals, acoustic guitar, kick drum, and overhead percussion without buying four different stands. For the live sound engineer who recognizes the standard counterweight-boom format and wants drop-in compatibility with the rest of the venue rig. The GFW-MIC-0821 is the boom stand you do not have to think about — it shows up, it goes where the mic needs to be, and it does that for every session it sees.