Powerful Low-End Reinforcement For Any Live Sound Setup
This is the Electro-Voice ELX200-12SP, a white 12-inch powered subwoofer built to deliver dependable low-frequency amplification for live stage applications, theaters, DJ setups, and mobile rigs. With 1200 watts of Class-D amplification driving a 12-inch woofer, this sub produces a solid frequency range from 41 to 165 Hz, giving sound engineers and performers the low-end punch a full-range PA setup needs to fill a room. Class-D amplification in particular gives this subwoofer an efficient power-to-weight ratio, meaning it can deliver serious output without the bulk and heat generation older amplifier designs would require at this wattage. That efficiency matters directly for anyone hauling gear from gig to gig, since a lighter, cooler-running amplifier section translates into less strain during load-in and a more reliable unit over a long night of use. Whether it's anchoring the low end for a full band on a stage, reinforcing bass for a DJ set, or filling out a mobile rig for a private event, this subwoofer is built to handle the demands of frequent setup, teardown, and transport that come with that kind of work. For engineers who need dependable bottom end without hauling around oversized, heavier gear, this is a subwoofer designed specifically around that balance of output and portability.
Simple Signal Routing Built For Fast Setup
Getting a signal into this subwoofer is straightforward thanks to two XLR combo jack inputs that also accept 1/4 inch connections, letting engineers route a balanced source such as a stereo mixer output directly into the unit. From there, two XLR link outputs allow that same signal to continue on to a set of full-range speakers, making it simple to build out a complete PA system where the subwoofer handles the low end while connected mains cover the rest of the spectrum. That combination of flexible inputs and pass-through outputs means this sub can slot into an existing rig or a brand new setup without requiring extra adapters or workarounds just to get signal flowing correctly. Because the combo jacks accept either XLR or 1/4 inch connections, engineers aren't locked into a single cable type, which matters when working with whatever mixer or snake happens to be available at a given venue. The link output design also simplifies daisy-chaining multiple full-range cabinets off a single subwoofer feed, reducing the amount of separate cable runs needed to get a full system connected and ready to go.
On Board DSP And Presets For Fast Tuning
A rear-panel knob paired with an LCD display gives direct access to master volume and the subwoofer's on-board DSP functions, putting tuning control right on the unit itself rather than requiring a separate control device. Three easy-setup presets are included for quick configuration in common scenarios, along with five user-programmable presets for engineers who want to save and recall their own specific settings across different venues or events. Adjustable low-pass frequency settings at 80, 100, 120, or 150 Hz let engineers dial in exactly where the subwoofer hands off to the full-range speakers above it, while built-in metering helps confirm signal levels are where they need to be during setup and soundcheck. Having those user-programmable presets available means a mobile engineer running the same rig at multiple recurring venues doesn't need to retune the system from scratch at every event, since a previously dialed-in configuration can simply be recalled. That combination of onboard processing and saved settings turns what could be a lengthy manual tuning process into something that can be handled in a matter of minutes.
Bluetooth Control For Convenient Remote Adjustment
Beyond the single-knob interface, this subwoofer supports configuration via Bluetooth, giving engineers the option to adjust settings remotely from a paired device rather than needing to walk over to the unit itself every time a tweak is needed. That kind of remote access is especially useful during a live show or a busy load-in, where reaching a subwoofer tucked against a stage or wall for manual adjustment isn't always convenient. Being able to make those changes from a phone or tablet nearby speeds up the tuning process and reduces the amount of back-and-forth walking a single engineer has to do while dialing in a room. For engineers working solo, without a second person to relay adjustments back and forth, that kind of remote control can meaningfully cut down on setup time before doors open. It also allows for quick on-the-fly adjustments mid-show if room acoustics or audience presence shift the sound in ways that call for a small correction.
Built To Handle The Realities Of Touring And Mobile Use
This subwoofer is housed in a plywood enclosure with a steel grille protecting the driver, giving it the durability and stability needed to hold up under the repeated loading, unloading, and transport that comes with mobile and touring use. Integrated carry handles are built directly into the cabinet, making it easier for a single person to move the unit in and out of a venue without needing extra rigging or a hand truck for every load-in. A top-panel M20 threaded hole allows a full-range speaker to be pole-mounted directly on top of the subwoofer, consolidating a two-piece system into a single stack that's quicker to set up and break down at each gig. That pole-mount capability also helps with venue logistics, since a stacked subwoofer and top cabinet takes up less floor space than two separate stands or cabinets spread across a stage. Combined with the protective steel grille guarding against accidental impacts during transport, this cabinet is built with the wear and tear of regular gigging specifically in mind, rather than being designed purely for a stationary, install-once environment.
A Practical Choice For DJs Mobile Engineers And Small Venues
Between its compact footprint, onboard DSP, Bluetooth control, and durable construction, this subwoofer fits naturally into the kind of setups where a single engineer or performer needs a reliable low end without hauling around an oversized rig. DJs running mobile events, engineers covering smaller stages or theaters, and mobile production companies moving gear from gig to gig all benefit from a subwoofer that's straightforward to set up, tune, and transport. Because it ships ready to connect with a power cable included, getting this subwoofer into a working rig doesn't require sourcing additional accessories just to get started. For anyone comparing subwoofer options for a mobile or small-venue rig, the combination of onboard tuning tools, wireless control, and a rugged, easy-to-carry cabinet covers most of what that kind of work actually demands from a single box.