Decimator Design DMON-QUAD 3G/HD/SD-SDI Quad Split Multi-Viewer-1

Decimator DMON-QUAD SDI to HDMI Converter with Quad Multi-Viewer

Decimator MC-DMON-QUAD openGear 4-Channel 3G-SDI Multiviewer

Home Monitors / Multiviewers Decimator MC-DMON-QUAD openGear 4-Channel 3G-SDI Multiviewer
$435.00

openGear 4-Channel 3G-SDI Multiviewer, 1-to-4 Multiview and 4-to-1 Multiplexer, Independent Input Formats, 1080p60 Support, 16-Character UMD Overlays, 8-Channel Audio Metering, RS-422/485 TSL Tally, DashBoard Remote Control

Availability: In Stock
SKU
MC-DMON-QUAD

Decimator MC-DMON-QUAD Features:

  • FOUR AUTO-DETECTING 3G-SDI INPUTS — each channel locks to its own data rate, resolution, and frame rate, so cameras and playback devices running different formats share one screen without external sync.
  • MULTIVIEW OR MULTIPLEX — operates as a 1-to-4 multiviewer for confidence monitoring or a 4-to-1 multiplexer for routing, with selectable standard layouts and per-quadrant aspect ratios.
  • PER-WINDOW UMD AND AUDIO METERING — adds a 16-character under-monitor display, 8-channel audio metering, and an audio ID label to every quadrant with custom position and size.
  • DYNAMIC TALLY OVER TSL — drives tally boxes and border tallies through RS-422/485 using the widely adopted TSL protocol, with up to four tallies per window for live switching.
  • OPENGEAR CARD DESIGN — slots into any openGear frame for rack-dense, redundant-power installation and pairs with the DR1-10B1G rear module for SDI connectivity and tally.
  • FRAME BUFFER AND DASHBOARD CONTROL — buffers unsynchronized sources with low latency, supports 3G Level A and B conversion, and configures remotely through openGear DashBoard software.

Decimator MC-DMON-QUAD: Four Live Feeds on One Screen

The Decimator MC-DMON-QUAD is an openGear 4-channel 3G-SDI multiviewer, merging four independent SDI sources onto a single monitor at resolutions up to 1080p60. A multiviewer collapses several separate video feeds into one composite picture, so a single screen replaces a wall of monitors. It slots into standard openGear frames, the open modular card standard where processing cards share a chassis, alongside other broadcast gear that draws on shared power and cooling. For engineers building a compact monitoring wall, it turns a rack of scattered feeds into one clear, confidence-ready picture.

Four Inputs, Four Different Formats

Each of the four 3G-SDI inputs auto-detects its own signal, so one quadrant can show 1080p59.94 while another shows 720p50 or interlaced standard definition. Auto-detection means the card reads each feed's resolution and frame rate on its own, without an operator dialing in settings. This per-channel independence removes the need to match every camera and playback device to a house standard, a facility's single agreed format, before monitoring. Mixed-format shoots and multi-source studios see every feed exactly as it arrives.

Multiviewer and Multiplexer in One Card

In multiview mode the card composites all four sources into selectable quad and standard layouts, each window carrying its own aspect ratio. Compositing simply means laying the feeds together into one frame the monitor can display. Switching to multiplexer mode routes a single chosen input straight through, and in pass-through the selected source feeds both SDI outputs at once. That dual role lets the same card serve monitoring and clean-feed routing without extra hardware.

Overlays Built for Live Production

Every window carries a 16-character under-monitor display, an 8-channel audio meter, and an audio ID label, each with custom positioning and sizing. An under-monitor display, or UMD, is the text strip that names each source right on the picture. Operators read source names and levels at a glance instead of memorizing which camera lives in which corner. In fast-cut environments those overlays are the difference between a clean take and a missed cue.

Tally and UMD Over Industry Protocols

Dynamic tallies and UMD text arrive over RS-422/485 using the widely implemented TSL protocol, driven by a connected switcher or automation system. A tally is the indicator that flags which source is currently on air or previewed, and TSL is the broadcast-standard messaging that carries that state. Tallies apply to dedicated tally boxes or to the window border, with up to four tallies per window for complex source states. Directors and technical directors get an instant read on which sources are live, previewed, or recording.

Synchronization Without External Genlock

Low-latency frame buffering on each input lets the card accept sources that are not running to a common reference. Genlock is the practice of locking every device to one shared timing signal so feeds stay in step; here per-input buffering does the aligning instead. It also supports 3G Level A and Level B on both inputs and output, the two ways a 3G-SDI signal can be mapped, converting between them as needed. Remote and field productions that cannot genlock every device still get a stable, tear-free composite.

openGear Integration and Remote Control

Designed as an openGear card, this multiviewer shares the frame's redundant power and network with the rest of a facility's signal chain. Redundant power means a backup supply takes over instantly if one fails, keeping the card alive through a fault. Configuration, layout recall, and monitoring run through openGear DashBoard software over the network, and a Mini-USB port handles firmware updates. Facility engineers manage dozens of cards from one control surface instead of walking the rack.

What the DR1-10B1G Rear Adds

SDI connectivity and tally reach the card through the separately available DR1-10B1G rear module, which provides the physical BNCs and control ports. In openGear frames the rear module is the panel that carries a card's actual connectors, so I/O and card are specified as a pair. Choosing the rear at install time keeps the front card format-flexible across different frame builds. Integrators specify the rear that matches their I/O count and mount both together for a finished slot.

Built for Broadcast Engineers and Studio Techs

Live broadcast trucks, house-of-worship control rooms, corporate AV studios, and post facilities all rely on this card to watch four critical feeds at once. It solves the classic problem of too many sources and too few monitors, freeing rack space and simplifying cabling. For any team that already runs an openGear frame, adding four-source monitoring becomes a single-slot decision.

More Information
MPN DD-MC-QUAD
Color Red
Input SDI
Power Source openGear Frame
Form openGear Multi-Viewer Card
Output SDI
Channels 4
UPC / EAN 5060417390175
Brand Decimator
Product Condition New
Availability In Stock

Decimator MC-DMON-QUAD Specifications

Product TypeopenGear 4-Channel 3G-SDI Multiviewer / Multiplexer
Form FactoropenGear card (requires DR1-10B1G rear module)
Inputs4 x (3G/HD/SD)-SDI, auto-detecting
OutputsSDI (selected input routable to both SDI outputs in pass-through)
Maximum Resolution1920 x 1080 (up to 1080p60)
SDI Data RateUp to 2.97 Gb/s; 3G-SDI Level A and B
Operating Modes1-to-4 multiviewer / 4-to-1 multiplexer
On-Screen Overlays16-character UMD, 8-channel audio metering, audio ID per window
Tally / UMDDynamic via RS-422/485, TSL protocol; up to 4 tallies per window
SynchronizationLow-latency frame buffer for unsynchronized sources
ControlopenGear DashBoard (network); Mini-USB for firmware updates