Austrian Audio CC8 Stereo Set Includes: 2 x CC8 Cardioid True Condenser Microphones, 2x OCH8 Mic Clip, 2x CCW8 Windshield, SB1 Stereo Bar, Transport Case-1

Austrian Audio CC8 Stereo Set Matched Pair Small-Diaphragm Condenser Microphones

Warm Audio WA14 Large-diaphragm Condenser Microphone Stereo Pair-1

Warm Audio WA-14 Matched Stereo Pair Large-Diaphragm Condenser Microphones

Austrian Audio MiCreator Satellite Expansion Microphone

Home Condenser Microphones Austrian Audio MiCreator Satellite Expansion Microphone
$79.00

Passive Expansion Microphone, 1/2-Inch Ceramic Condenser Capsule, Cardioid Pattern, 24-Bit / 48 kHz via MiCreator Studio, Swivelable Head, MCC2 TRRS Link Cable, Swappable Faceplates, Requires MiCreator Studio Hub

Availability: On Backorder – More Expected Soon
SKU
MiCreator Satellite Microphone

Austrian Audio MiCreator Satellite Features:

  • MATCHED SECOND CHANNEL: same 1/2-inch ceramic condenser capsule as the MiCreator Studio for a balanced stereo image
  • PASSIVE EXPANSION MIC: connects to and is powered by a MiCreator Studio hub, not a standalone USB mic
  • CARDIOID PATTERN: focuses on the source and rejects room noise for clean two-source capture
  • SWIVELABLE HEAD: rotating head places the capsule precisely in tight or shared setups
  • MCC2 LINK CABLE: included TRRS-to-TRRS cable connects the Satellite to the Studio in seconds
  • SWAPPABLE FACEPLATES: front and back plates change color and balance light on camera

Austrian Audio MiCreator Satellite: A Matched Second Channel for Your MiCreator

The Austrian Audio MiCreator Satellite is a modular expansion condenser microphone that adds a second, tonally identical channel to a MiCreator Studio for stereo or two-person recording. It carries the same custom 1/2-inch ceramic condenser capsule as the Studio, so the two channels share one voice with no tonal shift between them. Because it is a passive add-on, the Satellite draws power and its connection through the Studio hub rather than working on its own. For a creator who started with a single MiCreator Studio and now needs a second microphone, this is the piece that turns a mono rig into a true stereo or two-mic system. It is the smallest step from one voice to two.

Matched Ceramic Condenser Capsule

The Satellite uses the same custom 1/2-inch ceramic condenser capsule found in the MiCreator Studio, built with Austrian Audio's Open Acoustic Technology for a natural, open sound. A condenser capsule turns sound into an electrical signal using a thin diaphragm charged against a fixed backplate, and matching that capsule across both channels is what keeps a stereo image stable and centered. When both microphones hear the source with identical tone, the resulting stereo picture is even and free of the phase and color mismatches that plague mixed-capsule pairs. This matched design is the reason a Studio-plus-Satellite pair sounds like one instrument rather than two different microphones.

Passive Expansion, Powered by the Studio

The MiCreator Satellite is deliberately not a USB microphone; it has no interface of its own and cannot record alone. It connects to a MiCreator Studio through the included MCC2 TRRS-to-TRRS link cable, and the Studio supplies power and acts as the single interface to a computer or mobile device. This keeps the Satellite small, light, and inexpensive, while the Studio handles conversion, monitoring, and connectivity for both microphones. Anyone buying the Satellite should already own, or plan to buy, a MiCreator Studio to serve as the hub.

Swivelable Head for Tight Setups

The compact body carries a swivelable head so the capsule can be aimed precisely without repositioning the whole microphone. In a two-person podcast or a close stereo pair, that adjustability lets each channel point exactly where it needs to while the bodies stay out of frame and out of each other's way. The swivel is especially useful on a desk or small stand where space is limited and every degree of aim matters. It is a small mechanical detail that makes fast, repeatable placement possible.

Cardioid Pattern for Focused Capture

Both the Satellite and the Studio use a cardioid polar pattern, which is most sensitive to sound arriving from the front and rejects sound from the rear. In an untreated room, that rear rejection reduces reflections, keyboard clatter, and other off-axis noise so the recorded voice or instrument stays clean and present. For two-person recording, cardioid capture also helps keep each speaker on their own microphone with less bleed between channels. It is the pattern that keeps a modular desk setup sounding tight rather than roomy.

Swappable Faceplates for On-Camera Use

The Satellite ships with interchangeable front and back plates that let creators change the microphone's color and balance how it catches light on camera. On a streaming or video set, a plate that matches the scene keeps the microphone from becoming a distraction, or makes it a deliberate accent. Swapping plates takes seconds and needs no tools, so the look can change with the shot. It is a practical nod to creators who are on screen as often as they are behind the microphone.

Who the MiCreator Satellite Is For

The Satellite suits creators who own a MiCreator Studio and want to grow into two-person podcasting, stereo instrument or room recording, or interview work. Musicians use a Studio-plus-Satellite pair to capture acoustic instruments in stereo, while podcasters use it to put a guest on a matched second microphone. Because it is compact and powered by the Studio, it travels easily for mobile content creation. It is the natural second purchase in the MiCreator ecosystem.

More Information
MPN MiCreator-D-T
Color Black
Element Condenser
Pattern Cardioid
Power Source Powered via MiCreator Studio
Size Compact (1/2 in capsule)
Form Modular Expansion Microphone
Output 3.5mm TRRS link (to MiCreator Studio)
Channels Mono
On Promo No
UPC / EAN 810019100628
Brand Austrian Audio
Product Condition New
Availability Out of Stock

Austrian Audio MiCreator Satellite Microphone Specifications

TypePassive modular expansion condenser microphone (add-on for MiCreator Studio)
CapsuleCustom 1/2-inch ceramic condenser (same as MiCreator Studio)
Polar PatternCardioid
ResolutionUp to 24-bit / 48 kHz (via MiCreator Studio)
Max SPL130 dB SPL (low gain)
Acoustic TechnologyOpen Acoustic Technology
ConnectivityMCC2 TRRS-to-TRRS link cable to MiCreator Studio (Studio not included)
PowerPowered through the MiCreator Studio hub
MountingCompact body with swivelable head; desk, stand, or handheld