Calrad 55-879-75-6 RG59 Coax Cable w/ BNC Male to BNC Male 6' Long 75 Ohm Connectors-1

Calrad 55-879-75-6 RG59 Coax Cable

Hosa YMP-434 Stereo Breakout, 3.5 mm TRSF to Dual 1/4 in TS-1

Hosa YMP-434 Stereo Breakout, 3.5 mm TRSF to Dual 1/4 in TS

Austrian Audio MCC2 MiCreator Link Cable 4.5 ft

Home Cables, Connectors and Adapters Austrian Audio MCC2 MiCreator Link Cable 4.5 ft
$24.00

MiCreator Link Cable, 4.5 ft (1.4 m) Length, Dual 3.5 mm TRRS Connectors, Links Satellite to Studio, Carries Microphone and Stereo Audio, Passive, For Multi-Mic and Stereo MiCreator Setups

Availability: Special Order, Please Allow 2-4 Weeks For Delivery
SKU
MCC2 MiCreator Link Cable

Austrian Audio MCC2 MiCreator Link Cable Features:

  • CHAIN TWO MICS: Links a MiCreator Satellite to a MiCreator Studio so two mics feed one USB output
  • CARRIES MIC AND STEREO AUDIO: Dual 3.5 mm TRRS connectors pass both microphone and stereo audio between the units
  • FLEXIBLE 4.5 FT PLACEMENT: The 4.5 ft (1.4 m) length gives flexible mic placement for stereo and multi-source setups
  • NO MIXER NEEDED: Enables simple stereo and two-person recording without a mixer or extra interface

Austrian Audio MCC2 MiCreator Link Cable: Chain Two Mics Into One USB Output

The Austrian Audio MCC2 is a link cable that connects a MiCreator Satellite to a MiCreator Studio to build a two-microphone array. It lets two capsules share a single USB output, so a laptop or device sees one combined signal. This is how the modular MiCreator system grows from a single mic into a small multi-mic setup. The cable is passive and terminates in dual 3.5 mm TRRS plugs that carry both microphone and stereo audio. For creators who want stereo or two-person capture, it is the piece that ties the system together.

Dual 3.5 mm TRRS Connectors Carry Mic and Stereo Audio

Each end of the MCC2 uses a 3.5 mm TRRS plug, a four-conductor connector that carries more than a simple mono signal. That extra conductor lets the cable pass both the microphone audio and a stereo signal between the two MiCreator units. This is what allows a second mic to feed into the system cleanly rather than needing its own interface. The correct wiring is built in, so the connection just works when the units are linked.

A 4.5 ft Length for Flexible Two-Mic Placement

At 4.5 ft (1.4 m), the MCC2 gives room to position the two microphones where the sound is best rather than side by side. A stereo pair can be spread for a wider image, or a second mic can be placed in front of a second speaker. That freedom of placement is essential for good stereo and multi-source recordings. The length is generous enough for real setups yet compact enough to stay tidy on a desk.

Stereo and Two-Person Recording Without a Mixer

With the MCC2 linking two MiCreator mics, stereo and two-person recording become possible without any mixer or extra interface. Podcasters and streamers can give each host a dedicated mic, and musicians can capture an instrument in stereo. Gamers and commentators can keep a mic and stereo game audio flowing through one simple chain. It brings multi-microphone capability to a system designed to stay small and portable.

More Information
MPN MCC2
Color Black
Input 3.5mm TRRS
Power Source Passive
Size 4.5 ft (1.4 m)
Form Link Cable
Output 3.5mm TRRS
Brand Austrian Audio
Product Condition New
Availability Out of Stock

Austrian Audio MCC2 MiCreator Link Cable Specifications

TypeMiCreator Link Cable (passive)
Length4.5 ft (1.4 m)
ConnectorsDual 3.5 mm TRRS
PurposeLinks a MiCreator Satellite to a MiCreator Studio for a multi-mic array