4-Channel Stereo Headphone Amplifier, Independent Level Per Channel, One 1/4 in and One 1/8 in Output Per Channel, Eight Headphones Total, 20 dB Gain, +14 dBu Output, 32 to 600 Ohm Compatibility
The ART HeadAmp 4 is a 4-channel stereo headphone amplifier that takes one stereo feed and distributes it to four independently controlled outputs. Splitting a headphone output with passive adapters is the usual improvised alternative, and it fails for two reasons: the level drops as more headphones share the same drive, and nobody can set their own volume. A dedicated distribution amplifier gives each listener a proper amplifier stage and a proper control, so four people hear the same source at four different levels. For a rehearsal room or a tracking session where everyone needs something different, that is the difference between working and arguing.
Each of the four channels provides one 1/4 in output and one 1/8 in output, so eight headphones can be connected at the same time. Studio headphones almost always terminate in 1/4 in while consumer and portable models terminate in 1/8 in, and having both on every channel removes the adapter that always goes missing. Two listeners sharing one channel do share its level control, which is ideal for a pair who want the same mix and unhelpful for a pair who do not. A producer running a session with four performers and a guest can plan around that easily.
Output stages drive headphones from 32 ohms to 600 ohms with a 47 ohm source impedance on each jack, up to 20 dB of gain and a maximum output of +14 dBu. Headphone impedance varies enormously, and a high-impedance studio model that sounds quiet on a laptop needs a genuine amplifier behind it to reach a working level. A low source impedance also keeps the frequency response of a headphone consistent, because the interaction between amplifier output impedance and the headphone's own impedance curve can otherwise tilt the bass. Distortion below 0.01% and signal to noise better than 90 dB mean that level arrives clean.
Stereo inputs are provided on both 1/4 in and 1/8 in connectors, and frequency response runs 20 Hz to 20 kHz. That input pairing means the source can be a mixer output, an audio interface headphone jack, a laptop or a media player without any adapter in the chain. A clean, wide response matters more on headphones than many people expect, because headphones sit directly against the ear and reveal noise that a loudspeaker in a room would mask. Anyone tracking a quiet acoustic passage while monitoring on headphones hears the amplifier's noise floor as clearly as the music.
An external 12 V DC adapter is included and the chassis is metal and designed to stack with other units of the same size. External power keeps the transformer and its magnetic field outside the audio chassis, which is one of the simplest ways to keep hum out of a high-gain circuit. A metal enclosure adds shielding and survives life on a desk, a rack shelf or a rehearsal room floor far better than moulded plastic. Stacking matters in a studio where a headphone amplifier shares a small shelf with an interface and a monitor controller.
Rehearsal spaces, recording studios, podcast tables, classrooms and home theatres all run into the same limitation of a single headphone jack. A band rehearsing quietly on headphones needs four feeds at four levels, and a language lab needs several students monitoring the same programme independently. A podcast table with a host, two guests and a producer covers all four channels exactly, with the 1/8 in jacks available for anyone using consumer headphones. One small metal box turns a source with one headphone output into a system that serves a whole room.
| MPN | HEADAMP4 |
|---|---|
| UPC / EAN | 840402018087 |
| Brand | ART |
| Product Condition | New |
| Availability | In Stock |
| Product Type | 4-Channel Stereo Headphone Amplifier |
| Channels | 4, each with its own level control |
| Inputs | 1/4 in and 1/8 in stereo inputs |
| Outputs | One 1/4 in and one 1/8 in per channel, eight headphone connections total |
| Maximum Gain | 20 dB |
| Maximum Output Level | +14 dBu |
| Output Impedance | 47 ohms per output |
| Headphone Compatibility | 32 ohms to 600 ohms |
| Frequency Response | 20 Hz to 20 kHz |
| THD | Less than 0.01% |
| Signal to Noise Ratio | Greater than 90 dB referenced to 0 dBu |
| Power | 12 V DC adapter, included |
| Chassis | Stackable metal |