Allen & Heath ZED-14-RK19 Rack Kit for ZED-12FX, ZED-14 and XB-14-2

Allen & Heath ZED-14-RK19: Factory Rack Ears for ZED-12FX, ZED-14 and XB-14-2

The Allen & Heath ZED-14-RK19 is the factory 19-inch rack-mount kit that prepares a ZED-12FX, ZED-14, or XB-14-2 mixer for secure installation in a standard rack or flightcase. It contains two steel rack-ear brackets and the correct mounting screws, machined to fit those chassis exactly with no drilling. For install and touring, moving one of these consoles off a tabletop and into a protected rack turns a vulnerable mixer into road-ready gear. This is the OEM way to do it.

Exact Fit and Secure Mounting

Because the RK19 ears are made for the ZED-12FX, ZED-14, and XB-14-2 chassis, the bracket holes line up on the first try and the mixer sits square in the rack. Two steel brackets spread the mixer's weight across a standard 19-inch rail so it stays put through transport and daily use. The included screws are the right type and length, so nothing else needs sourcing. A rack mount also shields the faders and rear connectors from the knocks a bare mixer takes.

Where the RK19 Kit Fits In

The ZED-14-RK19 is aimed at rack-mounting a ZED-12FX, ZED-14, or XB-14-2 for install, flightcase touring setups, and fixed AV and studio racks. Integrators and rental companies use it to standardize the mixer into a rack alongside other 19-inch gear. As a passive accessory it needs no power and adds nothing to the signal path; it simply lets the mixer travel and install safely. For any of these three consoles, it is the correct direct-fit mounting solution.