Allen & Heath ZED-10-RK19 Rack Mount Kit for ZED-10 and ZED-10FX Mixers

Allen & Heath ZED-10-RK19: Factory Rack Ears for the ZED-10 and ZED-10FX

The Allen & Heath ZED-10-RK19 is the factory 19-inch rack-mount kit that prepares a ZED-10 or ZED-10FX mixer for secure installation in a standard rack or flightcase. It contains two steel rack-ear brackets and the correct mounting screws, machined to fit both mixers exactly with no drilling. For install and touring, moving the mixer off a tabletop and into a protected rack turns a vulnerable console into road-ready gear. This is the OEM way to do it.

Exact Fit and Secure Mounting

Because the RK19 ears are made for the ZED-10 and ZED-10FX chassis, the bracket holes line up on the first try and the mixer sits square in the rack. Two steel brackets spread the mixer's weight across a standard 19-inch rail so it stays put through transport and daily use. The included screws are the right type and length, so nothing else needs sourcing. A rack mount also shields the faders and rear connectors from the knocks a bare mixer takes.

Where the RK19 Kit Fits In

The ZED-10-RK19 is aimed at rack-mounting a ZED-10 or ZED-10FX for install, flightcase touring setups, and fixed AV and studio racks. Integrators and rental companies use it to standardize the mixer into a rack alongside other 19-inch gear. As a passive accessory it needs no power and adds nothing to the signal path; it simply lets the mixer travel and install safely. For any ZED-10 or ZED-10FX owner, it is the correct direct-fit mounting solution.