Remote Output Expander, 12 Balanced XLR Outputs, Analogue and Stereo AES Switchable, 96 kHz Conversion, Single Cat5e DX Link Snake, Dual Redundant etherCON Ports, 1U Rack Chassis
Allen & Heath warrants Allen & Heath branded hardware products and accessories contained in the original packaging against defects in materials for a period of ONE (1) YEAR from the date of original purchase by the end-user purchaser.
The Allen & Heath DX012 is a remote output expander that delivers 12 balanced XLR line outputs to a digital mixing system across one thin network cable. It exists to solve a familiar problem: you have a console at front of house but the amplifiers, matrix zones and broadcast feeds live somewhere else entirely. Rather than pulling a dozen long analogue runs, the DX012 places all 12 outputs exactly where they are needed and links back to the mixer over a single Cat5e cable. Every output is controlled and routed from the console surface, so the box becomes a silent, remote extension of the desk. For engineers who think in signal flow rather than cable spaghetti, that is a genuine relief.
Each of the 12 XLR outputs runs at a +4dBu nominal line level, the studio and touring standard that keeps headroom high and noise low into professional amplifiers and processors. What sets the DX012 apart is its routing flexibility: the same chassis can present 12 analogue outputs, 8 analogue plus 4 stereo AES pairs, or 4 analogue plus 8 stereo AES pairs. That means a single unit can feed analogue amp inputs and digital speaker-management processors at the same time. You decide the split in software and the box reconfigures its output stage to match. This is the kind of one-box-does-both versatility that keeps an output rack simple.
When outputs are set to AES, the DX012 lets you switch the digital sample rate between 44.1, 48, 88.2 and 96 kHz. That matters because a digital output is only useful if the device receiving it agrees on the clock, and speaker processors and broadcast interfaces vary in what they accept. Matching the AES rate at the source avoids sample-rate conversion and its small but real latency and quality penalties. The internal conversion itself runs at 96 kHz for wide bandwidth and low aliasing. Engineers feeding modern loudspeaker DSP or a broadcast truck get a clean, clocked digital handoff without an extra converter in the path.
The DX012 connects to the host system over DX Link, Allen & Heath's proprietary Layer 2 Ethernet transport, carried on a single Cat5e cable up to 328 ft (100 m) from the mixer. This is not Dante; it is a point-to-point digital snake engineered specifically for these consoles, using locking etherCON connectors so the link cannot be pulled loose on a busy stage. Two etherCON ports are provided, so you can run a redundant cable path or daisy-chain the DX012 to additional DX expanders downstream. That redundancy is what makes a single-cable approach trustworthy for shows where a dropped output is not an option. It replaces a heavy analogue multicore with something an assistant can coil in seconds.
The DX012 is a shared building block across Allen & Heath's professional ecosystem, working with dLive, Avantis, SQ and AHM systems through their DX ports. That common architecture means an output expander bought for one rig is not stranded when the console is upgraded or repurposed. A rental house can stock DX012 units knowing they drop onto whatever A&H surface a client specifies. The 1U chassis with integrated rack ears and a universal 100-240V supply travels internationally without adapters or fuss. It is designed to be a dependable, redeployable piece of infrastructure rather than a console-specific accessory.
In practice the DX012 lands wherever a system needs outputs far from the desk: driving an amplifier rack at the back of an arena, feeding a broadcast or recording split, or distributing audio to matrix zones across a venue. A single Cat5e run replaces what used to be a bundle of analogue tails, cutting weight, setup time and the chance of a mislabeled cable. Install integrators use it to push clean line-level and AES feeds into distributed sound systems in houses of worship, theaters and conference centers. Touring engineers value that the same box redeploys show after show. For anyone building a professional A&H rig, it is the straightforward way to put outputs exactly where the loudspeakers and processors actually are.
| MPN | AH-DX012 |
|---|---|
| Color | Black |
| Power Source | AC Mains |
| Size | 1U 19 inch rack |
| Form | I/O Expander |
| Output | 12 x XLR (analogue / AES switchable) |
| Channels | 12 out |
| UPC / EAN | 6938122249431 |
| Brand | Allen & Heath |
| Product Condition | New |
| Availability | Out of Stock |
| I/O | 0 in / 12 out |
| Outputs | 12 balanced XLR analogue outputs at +4dBu; configurable as 12 analogue, 8 analogue + 4 stereo AES, or 4 analogue + 8 stereo AES |
| AES Sample Rates | 44.1 / 48 / 88.2 / 96 kHz switchable |
| Sample Rate | 96 kHz |
| Connection | Single Cat5e over secure etherCON, up to 328 ft (100 m); two locking etherCON ports for redundancy or daisy-chain |
| Compatibility | dLive, Avantis, SQ, AHM via DX Link |
| Form Factor | 1U 19-inch rack, integrated rack ears |
| Power | Universal 100-240V AC 50/60Hz via IEC |