Allen & Heath AP9932 Padded Carry Bag for AB168 / DT168 / DX168 Stagebox

Allen & Heath AP9932: Padded Transport for the AB168, DT168 and DX168 Stagebox

The Allen & Heath AP9932 is a padded carry bag built specifically for the AB168, DT168 and DX168 portable audio racks. These stageboxes carry the mic preamps and outputs that feed a digital console over a single cable, so they ride to every gig and take the brunt of load-in. The AP9932 wraps that hardware in a shaped, padded shell that matches the rack's footprint rather than a loose sack that lets it knock around. A reinforced bottom panel takes the abuse of being set down on concrete, risers and truck decks. For the engineer who has watched an exposed stagebox get scuffed and dented on the road, this bag is the difference between a clean rack and a battered one. It turns a bare I/O box into a grab-and-go package.

Why a Portable Stagebox Needs a Dedicated Bag

A stagebox is a rack full of recallable preamps, XLR connectors and a network port, and those are exactly the parts that suffer from impact and grit. The AP9932 uses a padded polyester body with a reinforced base to absorb the shocks that would otherwise reach the connectors and chassis. A cutout lines up with the rack's own handle, so you can pick the unit up and carry it without unbagging it first, which keeps the connectors covered right up to the moment you patch in. The touch-fastener flap seals the top yet opens in one pull when it is time to rack up. Because the bag is cut to the AB168, DT168 and DX168 dimensions, the rack does not shift inside, and a stable load is a load that survives the trip. That combination of padding, handle access and a fast closure is what makes it a working transport bag rather than a dust sleeve.

Built for the AB168, DT168 and DX168 I/O Racks

This bag fits three of Allen & Heath's portable 16-in / 8-out stageboxes: the AB168 dSNAKE rack, the DT168 Dante rack and the DX168 DX-link rack. All three share the same compact chassis, so one bag covers whichever protocol your rig runs. It suits touring monitor and front-of-house engineers moving I/O between the stage and the console every night, rental houses protecting a shared stagebox between jobs, and installers transporting a rack to and from a venue. The bag also earns its place in storage, keeping dust and knocks off a stagebox that only comes out for events. Whether the rack lives on a drum riser, at a monitor position or in a truck, the AP9932 keeps it protected between patch-ins.

Fast Load-In, Fast Load-Out

On a tight changeover, the seconds spent wrestling gear in and out of a case add up. The AP9932 is designed around speed: the flap peels back with one motion, the handle cutout means the rack never has to leave the bag to be moved, and the light padded shell stows flat when the rack is deployed. That workflow keeps the stagebox covered longer and exposed less, which is the whole point of protective transport. For a crew that lives by the clock, a bag that keeps up with the pace is as valuable as the padding itself.