3.94-Foot (1.2 m) Detachable Length, FitLok Locking Termination, Green Color-Coded Jacket, Right-Angle 3.5mm (1/8-inch) Plug, 1/4-inch (6.35mm) Screw-On Adaptor Included, NTH-100 Compatible, Studio Headphone Cable
All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.
The Rode NTH-100 ships with a 2.4-meter (about 8-foot) detachable cable — generous for a stand-up vocal booth, excessive for a podcaster sitting two feet from the interface. The NTH-CABLE12-Green is the answer: a 1.2-meter (3.94-foot) replacement cable in a green jacket that keeps the headphone signal path tight, clean, and visually unmistakable.
Every NTH-CABLE12 cable terminates in the FitLok system that defines the NTH-100 family. The plug seats into either earcup, twists 90° to lock, and stays put until the user releases it deliberately. Standard headphone connectors back out under cable tension during a take — the FitLok does not. Reviewers consistently call out the locking system as the feature that justifies replacing third-party cables.
Five colors in the NTH-CABLE12 family — Green, Blue, Pink, Green, Orange — make it possible to assign one cable color per host in a multi-host rig. A four-person podcast around a RodeCaster Pro II console reduces tangle and setup time when every host's headphone cable is visibly different. Pair green with a color-matched XLR cable and WS14 pop filter and signal flow is unambiguous from the moment the studio opens.
The device-side connector is a right-angle 3.5mm (1/8-inch) stereo plug — engineered to exit parallel to the surface a laptop, interface, or mixer sits on. Straight plugs stress the jack when the cable runs flat across a desk; the right-angle geometry eliminates that strain and adds clearance for floor-routed cables. A 1/4-inch (6.35mm) screw-on adaptor ships in the same package, so the cable also drops onto pro headphone amps and console monitor outs without an extra purchase.
This cable is for three buyers: the NTH-100 owner whose original cable has worn or failed; the multi-host podcast studio that wants per-host color-coding from headphone through pop filter; and the home studio engineer who wants a clean 3.94-foot run between the listening chair and the interface. The green jacket is the visible signal that one cable belongs to one host — every other host gets a different color.
| MPN | NTH-CABLE12-Green |
|---|---|
| Color | Green |
| UPC / EAN | 698813008605 |
| Brand | Rode |
| Product Condition | New |
| Availability | In Stock |
| Length | 3.94 ft (1.2 m) |
| Color | Green |
| Device-Side Connector | 3.5mm (1/8-inch) Stereo Right-Angle |
| Headphone-Side Connector | NTH-100 Proprietary FitLok Locking |
| Adaptor Included | 1/4-inch (6.35mm) Screw-On |
| Compatibility | Rode NTH-100 Studio Headphones |
| Cable Type | Detachable Replacement |
| Termination | Single-Sided (left or right earcup) |