Radial Engineering ProAV2 2-channel Passive A/V Direct Box

Connect any device to the PA system
The ProAV2 is an indispensable device for live sound engineers and audio-video technicians alike, with the ability to seamlessly interface nearly any device with a pro audio system. A 3.5mm stereo input jack and dual 1/4" and RCA connectors ensure that you won't ever be hunting around for adaptor cables, while ultra-quiet performance with transformer isolation helps eliminate hum and buzz from ground loops. The ProAV2 maintains stereo separation and exhibits linear frequency response from 20Hz to 20kHz, with balanced mic-level XLR outputs that allow you to send signals through a multichannel audio snake on stage or into two channels of a mixing console.

The Radial ProAV2 is a passive stereo direct box specifically developed with the audio/video integrator in mind. The ProAV2 features a variety of stereo inputs, greatly simplifying signal management. To eliminate the need for various adapters, a 'Swiss Army' array of connections are provided, including 1/4" for instruments, RCA and 1/8" connectors for consumer electronics and computers, and a +4dB XLR Outputs for professional systems.

The ProAV2's front panel connectors can also be used as thru-puts to allow multiple patch points. Custom wound transformers are employed that are able to withstand exceptionally hot levels while maintaining linearity from 20Hz to 18.5kHz. Transformer isolation adds the benefit of eliminating ground loops that cause audio hum and buzz and video hum bars or snow. A -15dB pad is provided to tame hot signals and the ground lift eliminates hum and buzz caused by ground loops. If you do live sound for events, the ProAV2 should be in your toolbox!